AutoCodes – Toyota – B1903 2013 Toyota RAV4

B1903 2013 Toyota RAV4 Code - Short to Positive in Front Pretensioner Squib Right Circuit

Quick Answer

The Front Pretensioner Squib Right (RH) Circuit consists of the Center Airbag Sensor Assembly and Front Seat Outer Belt Assembly Right (RH). Common causes include Faulty Front Seat Outer Belt Assembly Right (RH) (Front Pretensioner Squib Right), Front Seat Outer Belt Assembly Right harness is open or shorted, Front Seat Outer Belt Assembly Right circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1903 2013 Toyota RAV4 indicates Short to Positive in Front Pretensioner Squib Right Circuit.
Common causes: Common causes include Faulty Front Seat Outer Belt Assembly Right (RH) (Front Pretensioner Squib Right), Front Seat Outer Belt Assembly Right harness is open or shorted, Front Seat Outer Belt Assembly Right circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 219

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Dec 03, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1903 2013 Toyota RAV4 Description

The Front Pretensioner Squib Right (RH) Circuit consists of the Center Airbag Sensor Assembly and Front Seat Outer Belt Assembly Right (RH). This circuit instructs the Supplemental Restraint System (SRS) to deploy when the deployment conditions are met. The Diagnostic Trouble Code (DTC) is recorded when a malfunction is detected in the Front Pretensioner Squib Right Circuit.

OBDII Code B1903 2013 Toyota RAV4 - Short to Positive in Front Pretensioner Squib Right Circuit - AutoCodes.com — B1903 2013 Toyota RAV4 Code - Short to Positive in Front Pretensioner Squib Right Circuit

What does this mean?

What are the Possible Causes of the DTC B1903 2013 Toyota RAV4?

Faulty Front Seat Outer Belt Assembly Right (RH) (Front Pretensioner Squib Right)
Front Seat Outer Belt Assembly Right harness is open or shorted
Front Seat Outer Belt Assembly Right circuit poor electrical connection
Faulty Center Airbag Sensor Assembly

How to Fix the DTC B1903 2013 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1903 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1903 2013 Toyota RAV4 code?

Need more information on how to fix the B1903 2013 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1903 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1903 2013 Toyota RAV4 Code

1. What are the common symptoms of OBDII code B1903 in a 2013 Toyota RAV4?

The common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the front pretensioner squib on the right side.

2. What does the OBDII code B1903 "Short to Positive in Front Pretensioner Squib Right Circuit" mean for a 2013 Toyota RAV4?

This code indicates a problem with the circuitry of the front pretensioner squib on the right side, suggesting a short to positive in the system.

3. What are the possible causes of OBDII code B1903 in a 2013 Toyota RAV4?

Potential causes include damaged wiring or connectors in the front pretensioner squib circuit, a faulty pretensioner squib, or issues with the airbag control module.

4. How can I diagnose the OBDII code B1903 in my 2013 Toyota RAV4?

Diagnosing this code typically involves inspecting the wiring and connectors in the front pretensioner squib circuit, testing the pretensioner squib for continuity, and checking the airbag control module for faults.

5. Can I drive my 2013 Toyota RAV4 with the OBDII code B1903 present?

It is not recommended to drive the vehicle with this code active as it indicates a potential issue with the airbag system, which is crucial for occupant safety in the event of a collision.

6. How can I repair OBDII code B1903 in my 2013 Toyota RAV4?

Repairing this code may involve repairing or replacing damaged wiring and connectors, replacing the front pretensioner squib if faulty, or addressing any issues with the airbag control module.

7. Is it safe to reset the OBDII code B1903 without fixing the underlying issue in a 2013 Toyota RAV4?

Resetting the code without addressing the root cause can temporarily turn off the warning light but does not fix the underlying problem, potentially putting the safety systems at risk.

8. Are there any recalls or service bulletins related to OBDII code B1903 in a 2013 Toyota RAV4?

It is advisable to check with your local Toyota dealership or visit the official Toyota website to see if there are any recalls or service bulletins related to this specific OBDII code for your vehicle.

9. Can a DIY mechanic fix OBDII code B1903 in a 2013 Toyota RAV4?

While some experienced DIY mechanics may be able to diagnose and repair this code, it is recommended to consult a professional technician, especially when dealing with airbag and safety systems.

10. How much does it typically cost to repair OBDII code B1903 in a 2013 Toyota RAV4?

The cost of repairing this code can vary depending on the underlying issue, parts needed for replacement, and labor costs. It is best to obtain quotes from reputable mechanics or dealerships for an accurate estimate.