AutoCodesToyota – B1902 2016 Toyota RAV4

B1902 2016 Toyota RAV4 Code - Short to Ground in Front Pretensioner Squib Right Circuit

Quick Answer

The Front Pretensioner Squib Right (RH) Circuit consists of the Center Airbag Sensor Assembly and Front Seat Outer Belt Assembly Right (RH). Common causes include Faulty Front Seat Outer Belt Assembly Right (RH) (Front Pretensioner Squib Right), Front Seat Outer Belt Assembly Right harness is open or shorted, Front Seat Outer Belt Assembly Right circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B1902 2016 Toyota RAV4 indicates Short to Ground in Front Pretensioner Squib Right Circuit.
Common causes
Common causes include Faulty Front Seat Outer Belt Assembly Right (RH) (Front Pretensioner Squib Right), Front Seat Outer Belt Assembly Right harness is open or shorted, Front Seat Outer Belt Assembly Right circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 335
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Dec 03, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1902 2016 Toyota RAV4 Description

The Front Pretensioner Squib Right (RH) Circuit consists of the Center Airbag Sensor Assembly and Front Seat Outer Belt Assembly Right (RH). This circuit instructs the Supplemental Restraint System (SRS) to deploy when the deployment conditions are met. The Diagnostic Trouble Code (DTC) is recorded when a malfunction is detected in the Front Pretensioner Squib Right Circuit.
OBDII Code B1902 2016 Toyota RAV4 - Short to Ground in Front Pretensioner Squib Right Circuit - AutoCodes.com
B1902 2016 Toyota RAV4 Code - Short to Ground in Front Pretensioner Squib Right Circuit

What are the Possible Causes of the DTC B1902 2016 Toyota RAV4?

  • Faulty Front Seat Outer Belt Assembly Right (RH) (Front Pretensioner Squib Right)
  • Front Seat Outer Belt Assembly Right harness is open or shorted
  • Front Seat Outer Belt Assembly Right circuit poor electrical connection
  • Faulty Center Airbag Sensor Assembly

How to Fix the DTC B1902 2016 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1902 2016 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1902 2016 Toyota RAV4 code?

Need more information on how to fix the B1902 2016 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1902 2016 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1902 2016 Toyota RAV4 Code

1. What are the common symptoms of OBDII code B1902 in a 2016 Toyota RAV4?

- Common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the front pretensioner squib right circuit.

2. What does the OBDII code B1902 "Short to Ground in Front Pretensioner Squib Right Circuit" mean for a 2016 Toyota RAV4?

- This code indicates a detected short to ground in the front pretensioner squib right circuit, likely related to the airbag system.

3. What are the possible causes of OBDII code B1902 in a 2016 Toyota RAV4?

- Potential causes include damaged wiring, a faulty pretensioner squib, a malfunctioning airbag control module, or issues with the airbag system's sensors.

4. How can I diagnose the OBDII code B1902 in my 2016 Toyota RAV4?

- Diagnosis typically involves inspecting the wiring harness, connectors, and components related to the front pretensioner squib right circuit, as well as using a diagnostic scanner to read and clear the code.

5. Is it safe to drive my 2016 Toyota RAV4 with OBDII code B1902 present?

- It is not recommended to drive the vehicle with this code present, as it indicates a potential issue with the airbag system that could affect its proper function in case of an accident.

6. Can I reset the OBDII code B1902 in my 2016 Toyota RAV4 without fixing the underlying issue?

- While you can clear the code with a diagnostic scanner, it is crucial to address the root cause of the problem to ensure the safety and functionality of the airbag system.

7. How much does it typically cost to repair OBDII code B1902 in a 2016 Toyota RAV4?

- Repair costs can vary depending on the specific cause of the issue, but they may involve replacing damaged wiring, the pretensioner squib, or other components in the airbag system.

8. Are there any DIY tips for fixing OBDII code B1902 in a 2016 Toyota RAV4?

- DIY repairs for this code are not recommended due to the complexity and safety implications of working on the airbag system. It's advised to seek professional assistance.

9. Can OBDII code B1902 in a 2016 Toyota RAV4 be a recurring issue after repair?

- If the root cause of the problem is not properly addressed during repair, the code may reappear. It's essential to ensure a thorough diagnosis and fix to prevent recurrence.

10. How long does it take to repair OBDII code B1902 in a 2016 Toyota RAV4?

- Repair time can vary based on the specific cause of the issue and the extent of the repair needed. It's best to consult with a qualified mechanic for an accurate estimate of the repair duration.

Discuss the causes and fixes for B1902 2016 Toyota RAV4 OBDII Code

Code B1902 2016 Toyota RAV4 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play