AutoCodes – Toyota – B1878 2016 Toyota RAV4

B1878 2016 Toyota RAV4 Code - Short to Positive in Passenger Side Front Seat Cushion Squib Circuit

Quick Answer

The Front Seat Cushion Squib Right (RH) Circuit consists of the Center Airbag Sensor Assembly and the Front Seat Airbag Sub-Assembly. Common causes include Faulty Front Seat Airbag Sub-Assembly (Front Seat Cushion Squib Right), Front Seat Airbag Sub-Assembly harness is open or shorted, Front Seat Airbag Sub-Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1878 2016 Toyota RAV4 indicates Short to Positive in Passenger Side Front Seat Cushion Squib Circuit.
Common causes: Common causes include Faulty Front Seat Airbag Sub-Assembly (Front Seat Cushion Squib Right), Front Seat Airbag Sub-Assembly harness is open or shorted, Front Seat Airbag Sub-Assembly circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 190

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Dec 02, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1878 2016 Toyota RAV4 Description

The Front Seat Cushion Squib Right (RH) Circuit consists of the Center Airbag Sensor Assembly and the Front Seat Airbag Sub-Assembly. This circuit instructs the Supplemental Restraint System (SRS) to deploy when deployment conditions are met. The Diagnostic Trouble Code (DTC) is stored when a malfunction is detected in the Front Seat Cushion Squib Right (RH).

OBDII Code B1878 2016 Toyota RAV4 - Short to Positive in Passenger Side Front Seat Cushion Squib Circuit - AutoCodes.com — B1878 2016 Toyota RAV4 Code - Short to Positive in Passenger Side Front Seat Cushion Squib Circuit

What does this mean?

What are the Possible Causes of the DTC B1878 2016 Toyota RAV4?

Faulty Front Seat Airbag Sub-Assembly (Front Seat Cushion Squib Right)
Front Seat Airbag Sub-Assembly harness is open or shorted
Front Seat Airbag Sub-Assembly circuit poor electrical connection
Faulty Center Airbag Sensor Assembly

How to Fix the DTC B1878 2016 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1878 2016 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1878 2016 Toyota RAV4 code?

Need more information on how to fix the B1878 2016 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1878 2016 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1878 2016 Toyota RAV4 Code

1. What are the common symptoms associated with OBDII code B1878 in a 2016 Toyota RAV4?

The common symptoms include an illuminated airbag warning light on the dashboard and potential issues with the passenger side front seat airbag system.

2. What does the OBDII code B1878 "Short to Positive in Passenger Side Front Seat Cushion Squib Circuit" indicate in a 2016 Toyota RAV4?

This code indicates a fault in the circuitry related to the passenger side front seat cushion airbag system, specifically a short to positive.

3. What are the possible causes of OBDII code B1878 in a 2016 Toyota RAV4?

Possible causes include damaged wiring or connectors in the passenger side front seat cushion airbag system, a faulty squib circuit, or a malfunctioning airbag control module.

4. How can I diagnose the issue related to OBDII code B1878 in my 2016 Toyota RAV4?

Diagnosing this issue typically involves inspecting the wiring and connectors in the passenger side front seat cushion airbag system, testing the squib circuit, and using a scan tool to retrieve specific diagnostic trouble codes.

5. Is it safe to drive my 2016 Toyota RAV4 with OBDII code B1878 present?

It is not recommended to drive the vehicle with an active airbag fault code like B1878, as it may indicate a potential safety risk in the passenger side front seat airbag system.

6. How can I repair OBDII code B1878 in my 2016 Toyota RAV4?

Repairing this code may involve repairing or replacing damaged wiring or connectors, addressing issues with the squib circuit, or replacing the airbag control module if necessary.

7. Can I reset the OBDII code B1878 in my 2016 Toyota RAV4 on my own?

While you can clear the code temporarily with an OBDII scan tool, it is crucial to diagnose and repair the underlying issue causing the code to prevent it from reoccurring.

8. What should I do if I cannot resolve OBDII code B1878 in my 2016 Toyota RAV4 on my own?

If you are unable to resolve the issue on your own, it is recommended to seek assistance from a qualified automotive technician or dealership for a thorough diagnosis and repair.

9. Are there any safety precautions I should take when working on the airbag system related to OBDII code B1878 in my 2016 Toyota RAV4?

When working on the airbag system, it is essential to disconnect the vehicle's battery, follow proper safety procedures, and avoid direct contact with airbag components to prevent accidental deployment.

10. How can I prevent OBDII code B1878 from occurring in my 2016 Toyota RAV4 in the future?

Regularly inspecting and maintaining the airbag system, avoiding physical damage to wiring and connectors, and addressing any warning signs promptly can help prevent OBDII code B1878 from occurring in the future.