B1875 Mercury Code - Hazard Warning Lamps Are Inoperative/Always On
Quick Answer
The Generic Electronic Module (GEM) sends a voltage reference signal to the hazard switch. Common causes include Faulty Hazard Warning Lamps Switch, Hazard Warning Lamps Switch harness is open or shorted, Hazard Warning Lamps Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1875 Mercury indicates Hazard Warning Lamps Are Inoperative/Always On.
- Common causes
- Common causes include Faulty Hazard Warning Lamps Switch, Hazard Warning Lamps Switch harness is open or shorted, Hazard Warning Lamps Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1875 Mercury Description
What are the Possible Causes of the DTC B1875 Mercury?
- Faulty Hazard Warning Lamps Switch
- Hazard Warning Lamps Switch harness is open or shorted
- Hazard Warning Lamps Switch circuit poor electrical connection
- Faulty Generic Electronic Module (GEM)
How to Fix the DTC B1875 Mercury?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1875 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1875 Mercury code?
Need more information on how to fix the B1875 Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1875 Mercury code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1875 Mercury Code
1. What does the OBDII code B1875 mean on a Mercury vehicle?
The B1875 code indicates a problem with the hazard warning lamps, specifically that they are either inoperative or always on.
2. What are the common symptoms of the B1875 code in a Mercury?
Typical symptoms include the hazard warning lights not turning on when activated or staying on continuously, even when switched off.
3. What causes the hazard warning lamps to become inoperative or always on in a Mercury?
The common causes include a faulty hazard light switch, damaged wiring or connectors in the hazard light circuit, or a malfunctioning body control module (BCM).
4. How can I diagnose the B1875 code on my Mercury?
Diagnosis involves checking the hazard light switch for proper operation, inspecting wiring and connectors for damage, and scanning the system with a diagnostic tool to verify the code and check for related codes.
5. Can a blown fuse cause the B1875 code?
Yes, a blown fuse in the hazard light circuit can cause the hazard lamps to be inoperative, but it is less likely to cause them to stay on continuously.
6. How do I fix the B1875 code on my Mercury?
Repairs may include replacing the hazard light switch, repairing or replacing damaged wiring or connectors, or reprogramming or replacing the body control module if necessary.
7. What tools are needed to troubleshoot the B1875 code?
You'll need a multimeter to test electrical connections, a diagnostic scanner to read and clear codes, and possibly a wiring diagram for your vehicle.
8. Can I drive my Mercury with the B1875 code active?
While you can drive with this code active, it is not recommended as it may compromise your ability to use hazard lights in emergencies.
9. How much does it typically cost to repair the B1875 code?
Repair costs vary but can range from $50 to $300 depending on whether the issue is with the switch, wiring, or body control module.
10. Can the B1875 code clear itself after a repair?
No, the code must be cleared using a diagnostic scanner after the underlying issue is resolved.
Discuss the causes and fixes for B1875 Mercury OBDII Code
Code B1875 Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
