AutoCodes - Mazda - B1875 MAZDA

B1875 MAZDA Code - Turn Signal / Hazard Switch Signal Circuit Failure

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3
Table of contents

|B1875 MAZDA code possible causes

  • Faulty Turn Signal / Hazard Switch
  • Turn Signal / Hazard Switch harness is open or shorted
  • Turn Signal / Hazard Switch circuit poor electrical connection
  • Faulty Body Control Module (BCM)

|How do I fix the B1875 MAZDA code?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|Cost of diagnosing the B1875 MAZDA code

Labor: 1.0

The cost of diagnosing the B1875 MAZDA code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

|What are B1875 MAZDA code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

|B1875 MAZDA code description

The Body Control Module (BCM) monitors the Turn Signal / Hazard Switch. The BCM sets the OBDII code when the Turn Signal / Hazard Switch is not to factory specifications.
OBDII Code B1875 Mazda - Turn Signal / Hazard Switch Signal Circuit Failure -

|Need more information with the B1875 MAZDA code?

Need more information on how to fix the B1875 MAZDA code? Get Access to Factory Service Manuals

|Need help with a B1875 MAZDA code?

Get the B1875 Mazda code diagnosed by a professional: Find a repair shop in your area

|B1875 MAZDA code comments

Help us improve Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the B1875 Mazda code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧
Repair Importance Level: 3
1=Low 2=Medium 3=High What is this?
Repair Difficulty Level: 3
1=Easy 2=Moderate 3=Hard What is this?