B1875 2016 Toyota RAV4 Code - Short in Passenger Side Front Seat Cushion Squib Circuit
Quick Answer
The Front Seat Cushion Squib Right (RH) Circuit consists of the Center Airbag Sensor Assembly and the Front Seat Airbag Sub-Assembly. Common causes include Faulty Front Seat Airbag Sub-Assembly (Front Seat Cushion Squib Right), Front Seat Airbag Sub-Assembly harness is open or shorted, Front Seat Airbag Sub-Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1875 2016 Toyota RAV4 indicates Short in Passenger Side Front Seat Cushion Squib Circuit.
- Common causes
- Common causes include Faulty Front Seat Airbag Sub-Assembly (Front Seat Cushion Squib Right), Front Seat Airbag Sub-Assembly harness is open or shorted, Front Seat Airbag Sub-Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1875 2016 Toyota RAV4 Description
What are the Possible Causes of the DTC B1875 2016 Toyota RAV4?
- Faulty Front Seat Airbag Sub-Assembly (Front Seat Cushion Squib Right)
- Front Seat Airbag Sub-Assembly harness is open or shorted
- Front Seat Airbag Sub-Assembly circuit poor electrical connection
- Faulty Center Airbag Sensor Assembly
How to Fix the DTC B1875 2016 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1875 2016 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1875 2016 Toyota RAV4 code?
Need more information on how to fix the B1875 2016 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1875 2016 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1875 2016 Toyota RAV4 Code
1. What does OBDII code B1875 mean on a 2016 Toyota RAV4?
Code B1875 indicates a short circuit in the passenger side front seat cushion squib circuit, which is part of the airbag system.
2. What are the symptoms of code B1875 in a Toyota RAV4?
Common symptoms include the airbag warning light staying illuminated and the passenger airbag potentially being disabled.
3. What causes the B1875 code to appear in a 2016 Toyota RAV4?
The most common causes are damaged or corroded wiring, a short circuit in the harness, or a faulty seat cushion airbag (squib).
4. Is it safe to drive with the B1875 code active?
It is not recommended to drive with this code active, as it may indicate that the passenger airbag will not deploy properly in the event of a collision.
5. How do you diagnose the B1875 code on a Toyota RAV4?
A technician will use a scan tool to confirm the code, inspect the wiring and connectors under the passenger seat, and test the seat cushion squib circuit for continuity and shorts.
6. Can a loose connection cause the B1875 code?
Yes, a loose or improperly connected harness under the passenger seat can trigger this code.
7. How much does it cost to fix the B1875 code on a 2016 Toyota RAV4?
Repair costs vary but typically range from $100 to $500 depending on whether the issue is a wiring repair or replacing the seat cushion airbag.
8. Can I reset the airbag light after fixing the B1875 code?
Yes, after repairs are completed, the code can be cleared using an OBDII scanner. If the issue is resolved, the airbag light should turn off.
9. What tools are needed to troubleshoot the B1875 code?
You’ll need an OBDII scanner, a multimeter for testing the circuit, and possibly wiring repair tools.
10. Do I need to replace the passenger seat to fix the B1875 code?
Not necessarily. The issue may be resolved by repairing or replacing the wiring or the seat cushion squib itself, rather than the entire seat.
Discuss the causes and fixes for B1875 2016 Toyota RAV4 OBDII Code
Code B1875 2016 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
