B1875 2013 Toyota RAV4 Code - Short in Passenger Side Front Seat Cushion Squib Circuit
Quick Answer
The Front Seat Cushion Squib Right (RH) Circuit consists of the Center Airbag Sensor Assembly and the Front Seat Airbag Sub-Assembly. Common causes include Faulty Front Seat Airbag Sub-Assembly (Front Seat Cushion Squib Right), Front Seat Airbag Sub-Assembly harness is open or shorted, Front Seat Airbag Sub-Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1875 2013 Toyota RAV4 indicates Short in Passenger Side Front Seat Cushion Squib Circuit.
- Common causes
- Common causes include Faulty Front Seat Airbag Sub-Assembly (Front Seat Cushion Squib Right), Front Seat Airbag Sub-Assembly harness is open or shorted, Front Seat Airbag Sub-Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1875 2013 Toyota RAV4 Description
What are the Possible Causes of the DTC B1875 2013 Toyota RAV4?
- Faulty Front Seat Airbag Sub-Assembly (Front Seat Cushion Squib Right)
- Front Seat Airbag Sub-Assembly harness is open or shorted
- Front Seat Airbag Sub-Assembly circuit poor electrical connection
- Faulty Center Airbag Sensor Assembly
How to Fix the DTC B1875 2013 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1875 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1875 2013 Toyota RAV4 code?
Need more information on how to fix the B1875 2013 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1875 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1875 2013 Toyota RAV4 Code
1. What are the common symptoms of OBDII code B1875 in a 2013 Toyota RAV4?
- The common symptoms include the airbag warning light staying illuminated on the dashboard and potential issues with the passenger side front seat airbag system.
2. What does the OBDII code B1875 indicating a "Short in Passenger Side Front Seat Cushion Squib Circuit" mean?
- This code suggests that there is a possible short circuit in the circuit responsible for the passenger side front seat airbag system in the vehicle.
3. What are the possible causes of OBDII code B1875 in a 2013 Toyota RAV4?
- The possible causes include damaged wiring in the seat cushion, a faulty seat cushion airbag squib, or a malfunctioning airbag control module.
4. How can I diagnose the issue related to OBDII code B1875 in my 2013 Toyota RAV4?
- Diagnosis typically involves inspecting the wiring under the passenger side front seat, checking the seat cushion airbag squib for continuity, and scanning the airbag system for any related fault codes.
5. Is it safe to drive my 2013 Toyota RAV4 with OBDII code B1875 present?
- It is not recommended to drive the vehicle with an active airbag system fault code, as it may compromise the effectiveness of the passenger side front seat airbag in the event of a collision.
6. Can I reset the OBDII code B1875 in my 2013 Toyota RAV4 without fixing the underlying issue?
- While you can clear the fault code using an OBDII scanner, it is crucial to address the root cause to ensure the proper functioning of the passenger side front seat airbag system.
7. How much does it typically cost to repair OBDII code B1875 in a 2013 Toyota RAV4?
- The cost of repair can vary depending on the exact cause of the issue, but it may involve replacing damaged wiring, repairing the seat cushion airbag squib, or reprogramming the airbag control module.
8. Are there any safety precautions to keep in mind when working on the airbag system related to OBDII code B1875?
- It is essential to disconnect the vehicle's battery and wait at least 10 minutes before working on the airbag system to prevent accidental deployment and ensure safety.
9. Can a DIY enthusiast with some automotive experience fix OBDII code B1875 in a 2013 Toyota RAV4?
- While some aspects of diagnosing and repairing the issue may be within reach for DIY enthusiasts, working on the airbag system requires caution and expertise due to safety considerations. Professional help is recommended.
10. How long does it typically take to repair OBDII code B1875 in a 2013 Toyota RAV4?
- The repair duration can vary based on the specific cause of the issue and the complexity of the repair needed. It may range from a few hours to a full day, depending on the extent of the troubleshooting and replacement required.
Discuss the causes and fixes for B1875 2013 Toyota RAV4 OBDII Code
Code B1875 2013 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
