B1862 Scion Code - Short to Ground in Driver Side Knee Airbag Squib Circuit
Quick Answer
The Driver Side Knee Airbag Squib Circuit consists of the Center Airbag Sensor Assembly and the Driver Side Knee Airbag Assembly. Common causes include Faulty Driver Side Knee Airbag Assembly (Driver Side Knee Squib), Driver Side Knee Airbag Assembly harness is open or shorted, Driver Side Knee Airbag Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1862 Scion indicates Short to Ground in Driver Side Knee Airbag Squib Circuit.
- Common causes
- Common causes include Faulty Driver Side Knee Airbag Assembly (Driver Side Knee Squib), Driver Side Knee Airbag Assembly harness is open or shorted, Driver Side Knee Airbag Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1862 Scion Description
What are the Possible Causes of the DTC B1862 Scion?
- Faulty Driver Side Knee Airbag Assembly (Driver Side Knee Squib)
- Driver Side Knee Airbag Assembly harness is open or shorted
- Driver Side Knee Airbag Assembly circuit poor electrical connection
- Faulty Center Airbag Sensor Assembly
How to Fix the DTC B1862 Scion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1862 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1862 Scion code?
Need more information on how to fix the B1862 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1862 Scion code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1862 Scion Code
1. What does the OBDII code B1862 mean on a Scion?
B1862 indicates a short to ground in the driver-side knee airbag squib circuit, which is part of the airbag deployment system.
2. What are common symptoms of the B1862 code in a Scion?
Symptoms include the airbag warning light staying illuminated, potential deactivation of the airbag system, and possibly stored fault codes in the vehicle's ECU.
3. What causes the B1862 code in a Scion?
Common causes include damaged or corroded wiring, a shorted driver-side knee airbag squib, a faulty clock spring, or a malfunctioning airbag control module.
4. Can I still drive my Scion with the B1862 code present?
While the vehicle may still be drivable, the airbag system may not function properly, which could pose a safety risk in the event of an accident.
5. How do I diagnose the B1862 code on my Scion?
Diagnosis involves using an OBDII scanner to confirm the code, visually inspecting the wiring and connectors for damage, and testing the circuit for continuity or shorts.
6. What repairs are usually needed for the B1862 code?
Repairs may include replacing damaged wiring, repairing connectors, replacing the driver-side knee airbag squib, or addressing issues with the airbag control module.
7. How much does it cost to fix the B1862 code in a Scion?
Repair costs vary but can range from $100 to $500 or more, depending on whether wiring repairs or component replacements like the airbag squib are necessary.
8. Can I reset the B1862 code without fixing the problem?
You can clear the code with an OBDII scanner, but it will likely return if the underlying issue is not addressed.
9. Is the B1862 code covered under warranty for my Scion?
Airbag-related repairs may be covered under warranty, especially if the vehicle is still within the manufacturer's warranty period. Check with your dealer for specifics.
10. Should I attempt to repair the B1862 code myself?
Due to the complexity and safety risks associated with the airbag system, repairs should be performed by a qualified technician to ensure proper functionality.
Discuss the causes and fixes for B1862 Scion OBDII Code
Code B1862 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
