AutoCodesToyota – B1847 Toyota

B1847 Toyota Code - Short To Ground In Curtain Shield Squib Left 2nd Step Circuit

Quick Answer

The Curtain Shield Squib Left (LF) 2nd Step Circuit consists of the Center Airbag Sensor Assembly and the Curtain Shield Airbag Assembly Left (LH). Common causes include Faulty Curtain Shield Airbag Assembly Left (LH) (Curtain Shield Squib Left 2nd Step), Curtain Shield Airbag Assembly Left harness is open or shorted, Curtain Shield Airbag Assembly Left circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B1847 Toyota indicates Short To Ground In Curtain Shield Squib Left 2nd Step Circuit.
Common causes
Common causes include Faulty Curtain Shield Airbag Assembly Left (LH) (Curtain Shield Squib Left 2nd Step), Curtain Shield Airbag Assembly Left harness is open or shorted, Curtain Shield Airbag Assembly Left circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 1,066
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jul 07, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1847 Toyota Description

The Curtain Shield Squib Left (LF) 2nd Step Circuit consists of the Center Airbag Sensor Assembly and the Curtain Shield Airbag Assembly Left (LH). The circuit instructs the Supplemental Restraint System (SRS) to deploy when deployment conditions are met. The Diagnostic Trouble Code (DTC) is stored when a malfunction is detected in the Curtain Shield Squib Left 2nd Step Circuit.
OBDII Code B1847 Toyota - Short To Ground In Curtain Shield Squib Left 2nd Step Circuit - AutoCodes.com
B1847 Toyota Code - Short To Ground In Curtain Shield Squib Left 2nd Step Circuit

What are the Possible Causes of the DTC B1847 Toyota?

  • Faulty Curtain Shield Airbag Assembly Left (LH) (Curtain Shield Squib Left 2nd Step)
  • Curtain Shield Airbag Assembly Left harness is open or shorted
  • Curtain Shield Airbag Assembly Left circuit poor electrical connection
  • Faulty Center Airbag Sensor Assembly

How to Fix the DTC B1847 Toyota?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1847 Toyota code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1847 Toyota code?

Need more information on how to fix the B1847 Toyota code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1847 Toyota code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1847 Toyota Code

1. What are the common symptoms of OBDII code B1847 Toyota (Short To Ground In Curtain Shield Squib Left 2nd Step Circuit)?

- Common symptoms include an illuminated airbag warning light on the dashboard, disabled airbag system, and potential issues with the left side curtain shield airbag deployment.

2. What could cause the OBDII code B1847 Toyota to trigger?

- The code B1847 indicates a short to ground in the curtain shield squib left 2nd step circuit, which could be caused by damaged wiring, a faulty squib (airbag inflator), or a poor connection.

3. How can I diagnose the root cause of OBDII code B1847 Toyota?

- To diagnose the issue, you may need to perform a thorough inspection of the wiring harness, connectors, and the curtain shield squib itself. Using a multimeter to test for continuity and resistance can help pinpoint the fault.

4. Is it safe to drive with OBDII code B1847 Toyota present?

- It is not recommended to drive with the B1847 code active, as it indicates a potential issue with the airbag system that could affect its proper deployment in the event of a collision.

5. What are the repair options for fixing OBDII code B1847 Toyota?

- Repair options may include repairing or replacing damaged wiring, fixing poor connections, or replacing the curtain shield squib if it is found to be faulty.

6. Can I reset the OBDII code B1847 Toyota with a diagnostic scanner?

- Resetting the code with a diagnostic scanner may temporarily clear the code, but it will likely return if the underlying issue is not addressed and fixed.

7. How much does it typically cost to repair OBDII code B1847 Toyota?

- The cost of repairing the B1847 code can vary depending on the extent of the damage and the necessary repairs. Costs may include parts and labor for diagnosing and fixing the issue.

8. Is it possible to prevent OBDII code B1847 Toyota from occurring in the future?

- Regular maintenance and inspection of the airbag system, including checking for any signs of damage or wear in the wiring and connectors, can help prevent issues like the B1847 code from occurring.

9. Can I attempt to repair OBDII code B1847 Toyota myself, or should I seek professional help?

- Repairing the B1847 code may require advanced knowledge of automotive electrical systems and airbag components. It is recommended to seek professional help to ensure the issue is properly diagnosed and repaired.

10. How urgent is it to address OBDII code B1847 Toyota once it appears?

- It is important to address the B1847 code promptly to ensure the proper functioning of the airbag system. Ignoring the code could compromise the safety of the vehicle occupants in the event of a collision.

Discuss the causes and fixes for B1847 Toyota OBDII Code

Code B1847 Toyota comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play