AutoCodes – Lexus – B1831 Lexus

B1831 Lexus Code - Open in Curtain Shield Squib Right Circuit

Quick Answer

The Curtain Shield Squib Right (RH) Circuit consists of the Center Airbag Sensor Assembly and the Curtain Shield Airbag Right (RH). Common causes include Faulty Curtain Shield Airbag Right (RH) (Curtain Shield Squib Right), Curtain Shield Airbag Right harness is open or shorted, Curtain Shield Airbag Right circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1831 Lexus indicates Open in Curtain Shield Squib Right Circuit.
Common causes: Common causes include Faulty Curtain Shield Airbag Right (RH) (Curtain Shield Squib Right), Curtain Shield Airbag Right harness is open or shorted, Curtain Shield Airbag Right circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 5,053

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 29, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1831 Lexus Description

The Curtain Shield Squib Right (RH) Circuit consists of the Center Airbag Sensor Assembly and the Curtain Shield Airbag Right (RH). The Curtain Shield Airbag is mounted between the front and rear pillars on both the driver and passenger sides. The circuit instructs the Supplemental Restraint System (SRS) to deploy when the deployment conditions are met. The Diagnostic Trouble Code (DTC) is recorded when a malfunction is detected in the Curtain Shield Squib Right Circuit.

OBDII Code B1831 Lexus - Open in Curtain Shield Squib Right Circuit - AutoCodes.com — B1831 Lexus Code - Open in Curtain Shield Squib Right Circuit

What does this mean?

What are the Possible Causes of the DTC B1831 Lexus?

Faulty Curtain Shield Airbag Right (RH) (Curtain Shield Squib Right)
Curtain Shield Airbag Right harness is open or shorted
Curtain Shield Airbag Right circuit poor electrical connection
Faulty Center Airbag Sensor Assembly

How to Fix the DTC B1831 Lexus?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1831 Lexus code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1831 Lexus code?

Need more information on how to fix the B1831 Lexus code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1831 Lexus code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1831 Lexus Code

1. What does the OBDII code B1831 for Lexus mean?

The code B1831 indicates an open circuit in the Curtain Shield Squib (airbag) on the right side of the vehicle in a Lexus.

2. What are the common symptoms associated with OBDII code B1831 in a Lexus?

Common symptoms of code B1831 may include the airbag warning light illuminating on the dashboard and a potential failure of the right side curtain airbag system.

3. What are the possible causes of OBDII code B1831 in a Lexus?

Possible causes of code B1831 include a damaged or faulty curtain shield squib (airbag) on the right side, wiring issues, poor electrical connections, or a blown fuse related to the airbag system.

4. How serious is OBDII code B1831 in a Lexus?

Code B1831 should be taken seriously as it indicates a potential issue with the right side curtain airbag system. It is crucial to address this problem promptly to ensure the proper functioning of the airbag in the event of a collision.

5. Can I continue driving my Lexus with OBDII code B1831 present?

It is not recommended to continue driving your Lexus with code B1831 present, as there may be a malfunction in the right side curtain airbag system. It is advised to have the issue diagnosed and repaired by a qualified technician as soon as possible.

6. How can I diagnose OBDII code B1831 in my Lexus?

Diagnosing code B1831 typically involves using an OBDII scanner to retrieve the specific fault code, inspecting the curtain shield squib and related wiring for damage, and testing the electrical connections in the airbag system.

7. What are some repair tips for fixing OBDII code B1831 in a Lexus?

Repair tips for addressing code B1831 may include repairing or replacing the faulty curtain shield squib on the right side, repairing damaged wiring, ensuring proper electrical connections, and resetting the airbag system.

8. Is it possible to reset OBDII code B1831 in a Lexus without fixing the underlying issue?

While it is possible to clear the fault code temporarily, it is essential to address the root cause of code B1831 to ensure the proper functioning of the right side curtain airbag system and the overall safety of the vehicle.

9. Can a DIY enthusiast fix OBDII code B1831 in a Lexus at home?

Repairing OBDII code B1831 may require advanced knowledge and tools related to airbag systems and electrical components. It is recommended to seek assistance from a professional technician to properly diagnose and repair the issue.

10. How much does it cost to repair OBDII code B1831 in a Lexus?

The cost of repairing code B1831 can vary depending on the root cause of the issue, the parts needed for replacement, and the labor rates of the repair facility. It is advisable to obtain quotes from different repair shops for an accurate estimate.