B182C Jeep Code - All Door Lock Control Circuit
Quick Answer
After receiving the appropriate requests over the communication network, the Body Control Module (BCM) controls an internal relay to provide voltage to all the door lock motors on the door lock driver circuit. Common causes include Faulty Driver Side, Front Passenger, Left Rear, Right Rear or Tailgate Door Lock Motor, Driver Side, Front Passenger, Left Rear, Right Rear or Tailgate Door Lock Motor harness is open or shorted, Driver Side, Front Passenger, Left Rear, Right Rear or Tailgate Door Lock Motor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B182C Jeep indicates All Door Lock Control Circuit.
- Common causes
- Common causes include Faulty Driver Side, Front Passenger, Left Rear, Right Rear or Tailgate Door Lock Motor, Driver Side, Front Passenger, Left Rear, Right Rear or Tailgate Door Lock Motor harness is open or shorted, Driver Side, Front Passenger, Left Rear, Right Rear or Tailgate Door Lock Motor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B182C Jeep Description
What are the Possible Causes of the DTC B182C Jeep?
- Faulty Driver Side, Front Passenger, Left Rear, Right Rear or Tailgate Door Lock Motor
- Driver Side, Front Passenger, Left Rear, Right Rear or Tailgate Door Lock Motor harness is open or shorted
- Driver Side, Front Passenger, Left Rear, Right Rear or Tailgate Door Lock Motor circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC B182C Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B182C-12 ALL DOOR LOCK CONTROL CIRCUIT SHORT TO BATTERY
B182C-13 ALL DOOR LOCK CONTROL CIRCUIT OPEN
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B182C Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B182C Jeep code?
Need more information on how to fix the B182C Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B182C Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B182C Jeep Code
1. What are common symptoms of OBDII code B182C in a Jeep related to the All Door Lock Control Circuit?
- Common symptoms include malfunctioning power door locks, doors not locking or unlocking properly, and issues with the central locking system.
2. What are the possible causes of OBDII code B182C in a Jeep?
- Possible causes include damaged wiring or connectors in the door lock circuit, a faulty door lock actuator, or issues with the body control module.
3. How can I diagnose the All Door Lock Control Circuit issue causing OBDII code B182C in my Jeep?
- Use a diagnostic scanner to read the code, check the wiring and connectors for damage, and test the door lock actuator's functionality.
4. Is it safe to continue driving my Jeep with OBDII code B182C related to the All Door Lock Control Circuit?
- While it may be safe to drive, it is recommended to address the issue promptly to avoid potential inconvenience or security risks associated with malfunctioning door locks.
5. Can I repair OBDII code B182C in my Jeep related to the All Door Lock Control Circuit myself?
- Depending on your skill level, you may be able to repair the issue yourself by replacing damaged wiring, connectors, or the door lock actuator. However, professional assistance is recommended for complex repairs.
6. How much does it typically cost to repair OBDII code B182C in a Jeep related to the All Door Lock Control Circuit?
- The cost of repair can vary depending on the specific cause of the issue, but it may range from around $100 to $300 for parts and labor.
7. Are there any preventive measures to avoid OBDII code B182C related to the All Door Lock Control Circuit in my Jeep?
- Regularly checking and maintaining the door lock system, addressing any issues promptly, and avoiding excessive force when operating the door locks can help prevent this code from appearing.
8. Can a low battery voltage trigger OBDII code B182C in a Jeep related to the All Door Lock Control Circuit?
- Yes, low battery voltage can cause communication issues between the modules in the vehicle, potentially leading to the appearance of this code.
9. Will resetting the OBDII code B182C related to the All Door Lock Control Circuit in my Jeep make the issue go away permanently?
- Resetting the code may temporarily clear the warning, but if the underlying issue is not addressed, the code is likely to reappear. It is important to diagnose and fix the root cause of the problem.
10. How long does it typically take to repair OBDII code B182C in a Jeep related to the All Door Lock Control Circuit?
- The repair time can vary depending on the specific cause of the issue and the complexity of the repair, but it may take anywhere from 1 to 3 hours in a professional repair shop.
Discuss the causes and fixes for B182C Jeep OBDII Code
Code B182C Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
