B1828 Scion Code - Short to Positive in Side Squib Left Circuit
Quick Answer
The Front Side Squib Left (LH) Circuit consists of the Center Airbag Sensor Assembly and Front Seat Airbag Assembly Left (LH). Common causes include Faulty Front Seat Airbag Assembly Left (LH) (Front Side Squib Left), Front Seat Side Airbag Assembly LH harness is open or shorted, Front Seat Side Airbag Assembly LH circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1828 Scion indicates Short to Positive in Side Squib Left Circuit.
- Common causes
- Common causes include Faulty Front Seat Airbag Assembly Left (LH) (Front Side Squib Left), Front Seat Side Airbag Assembly LH harness is open or shorted, Front Seat Side Airbag Assembly LH circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1828 Scion Description
What are the Possible Causes of the DTC B1828 Scion?
- Faulty Front Seat Airbag Assembly Left (LH) (Front Side Squib Left)
- Front Seat Side Airbag Assembly LH harness is open or shorted
- Front Seat Side Airbag Assembly LH circuit poor electrical connection
- Faulty Center Airbag Sensor Assembly
How to Fix the DTC B1828 Scion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1828 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1828 Scion code?
Need more information on how to fix the B1828 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1828 Scion code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1828 Scion Code
1. What does the OBDII code B1828 mean for a Scion?
The B1828 code indicates a "Short to Positive in Side Squib Left Circuit," which relates to the airbag system on the driver’s side.
2. What are the symptoms of the B1828 code in a Scion?
Common symptoms include the airbag warning light being illuminated and the airbag system potentially being disabled.
3. What causes the B1828 code in a Scion?
The most common causes are damaged wiring, a short circuit in the side airbag wiring harness, or a faulty side airbag module.
4. Is it safe to drive with the B1828 code present?
No, it’s not safe, as the airbag system may not function properly in the event of a collision.
5. How do you diagnose the B1828 code in a Scion?
A technician will inspect the wiring and connectors for damage, check for continuity in the circuit, and test the airbag module using a scan tool.
6. Can a loose connection cause the B1828 code?
Yes, a loose or corroded connector in the side airbag circuit can trigger this code.
7. How do you fix the B1828 code in a Scion?
Repairs may include replacing damaged wires, repairing short circuits, or replacing the side airbag module if it’s faulty.
8. Will clearing the code fix the B1828 issue?
Clearing the code will only reset the light temporarily; the underlying issue must be resolved to prevent the code from returning.
9. How much does it cost to repair the B1828 code in a Scion?
Repair costs vary, but they typically range from $150 to $500 depending on whether wiring repairs or airbag module replacement is required.
10. Can the B1828 code cause the airbag to deploy unexpectedly?
While rare, a short to positive in the circuit could potentially cause unintended airbag deployment, so addressing this issue promptly is crucial.
Discuss the causes and fixes for B1828 Scion OBDII Code
Code B1828 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
