AutoCodesToyota – B1828 2013 Toyota RAV4

B1828 2013 Toyota RAV4 Code - Short to Positive in Side Squib Left Circuit

Quick Answer

The Front Side Squib Left (LH) Circuit consists of the Center Airbag Sensor Assembly and Front Seat Airbag Assembly Left (LH). Common causes include Faulty Front Seat Airbag Assembly Left (LH) (Front Side Squib Left), Front Seat Side Airbag Assembly LH harness is open or shorted, Front Seat Side Airbag Assembly LH circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B1828 2013 Toyota RAV4 indicates Short to Positive in Side Squib Left Circuit.
Common causes
Common causes include Faulty Front Seat Airbag Assembly Left (LH) (Front Side Squib Left), Front Seat Side Airbag Assembly LH harness is open or shorted, Front Seat Side Airbag Assembly LH circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 237
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Nov 29, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1828 2013 Toyota RAV4 Description

The Front Side Squib Left (LH) Circuit consists of the Center Airbag Sensor Assembly and Front Seat Airbag Assembly Left (LH). The circuit instructs the Supplemental Restraint System (SRS) to deploy when deployment conditions are met. The Diagnostic Trouble Code (DTC) is stored when a malfunction is detected in the Front Side Squib Left (LH) Circuit.
OBDII Code B1828 2013 Toyota RAV4 - Short to Positive in Side Squib Left Circuit - AutoCodes.com
B1828 2013 Toyota RAV4 Code - Short to Positive in Side Squib Left Circuit

What are the Possible Causes of the DTC B1828 2013 Toyota RAV4?

  • Faulty Front Seat Airbag Assembly Left (LH) (Front Side Squib Left)
  • Front Seat Side Airbag Assembly LH harness is open or shorted
  • Front Seat Side Airbag Assembly LH circuit poor electrical connection
  • Faulty Center Airbag Sensor Assembly

How to Fix the DTC B1828 2013 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1828 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1828 2013 Toyota RAV4 code?

Need more information on how to fix the B1828 2013 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1828 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1828 2013 Toyota RAV4 Code

1. What are the common symptoms of OBDII code B1828 in a 2013 Toyota RAV4?

- Common symptoms include the airbag warning light illuminating on the dashboard and potential non-deployment of the driver's side airbag during a collision.

2. What does the OBDII code B1828 "Short to Positive in Side Squib Left Circuit" mean for a 2013 Toyota RAV4?

- This code indicates a problem with the driver's side airbag system in the vehicle.

3. What are some possible causes of OBDII code B1828 in a 2013 Toyota RAV4?

- Possible causes include a faulty driver's side airbag module, damaged wiring in the side squib left circuit, or a malfunctioning airbag control module.

4. How serious is OBDII code B1828 in a 2013 Toyota RAV4?

- This code relates to the safety of the driver and passengers, so it should be addressed promptly to ensure proper functioning of the airbag system in the event of an accident.

5. Can OBDII code B1828 in a 2013 Toyota RAV4 be fixed without professional help?

- Due to the safety implications of airbag systems, it is recommended to have this code diagnosed and repaired by a qualified automotive technician.

6. What steps should be taken to diagnose OBDII code B1828 in a 2013 Toyota RAV4?

- Diagnosis typically involves using a scan tool to retrieve the specific fault codes, conducting visual inspections of the airbag system components, and testing the wiring and connectors for faults.

7. Is it safe to continue driving a 2013 Toyota RAV4 with OBDII code B1828?

- It is not recommended to continue driving the vehicle with this code present, as it may compromise the proper functioning of the driver's side airbag in the event of a collision.

8. How much does it typically cost to repair OBDII code B1828 in a 2013 Toyota RAV4?

- The cost of repair can vary depending on the exact cause of the issue, but it may involve replacing the driver's side airbag module, repairing damaged wiring, or reprogramming the airbag control module.

9. Can resetting the OBDII code B1828 in a 2013 Toyota RAV4 make it go away permanently?

- Simply resetting the code without addressing the underlying issue will not fix the problem permanently. It is important to diagnose and repair the root cause of the code for a lasting solution.

10. Are there any recalls or technical service bulletins related to OBDII code B1828 in a 2013 Toyota RAV4?

- It is advisable to check with Toyota or a certified dealership to see if there are any recalls or technical service bulletins related to this specific OBDII code in the 2013 RAV4 model.

Discuss the causes and fixes for B1828 2013 Toyota RAV4 OBDII Code

Code B1828 2013 Toyota RAV4 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play