AutoCodes – Toyota – B1825 Toyota

B1825 Toyota Code - Short in Side Squib Left Circuit

Quick Answer

The Front Side Squib Left (LH) Circuit consists of the Center Airbag Sensor Assembly and Front Seat Airbag Assembly Left (LH). Common causes include Faulty Front Seat Airbag Assembly Left (LH) (Front Side Squib Left), Front Seat Side Airbag Assembly LH harness is open or shorted, Front Seat Side Airbag Assembly LH circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1825 Toyota indicates Short in Side Squib Left Circuit.
Common causes: Common causes include Faulty Front Seat Airbag Assembly Left (LH) (Front Side Squib Left), Front Seat Side Airbag Assembly LH harness is open or shorted, Front Seat Side Airbag Assembly LH circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 11,176

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 29, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1825 Toyota Description

The Front Side Squib Left (LH) Circuit consists of the Center Airbag Sensor Assembly and Front Seat Airbag Assembly Left (LH). The circuit instructs the Supplemental Restraint System (SRS) to deploy when deployment conditions are met. The Diagnostic Trouble Code (DTC) is stored when a malfunction is detected in the Front Side Squib Left (LH) Circuit.

OBDII Code B1825 Toyota - Short in Side Squib Left Circuit - AutoCodes.com — B1825 Toyota Code - Short in Side Squib Left Circuit

What does this mean?

What are the Possible Causes of the DTC B1825 Toyota?

Faulty Front Seat Airbag Assembly Left (LH) (Front Side Squib Left)
Front Seat Side Airbag Assembly LH harness is open or shorted
Front Seat Side Airbag Assembly LH circuit poor electrical connection
Faulty Center Airbag Sensor Assembly

How to Fix the DTC B1825 Toyota?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1825 Toyota code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1825 Toyota code?

Need more information on how to fix the B1825 Toyota code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1825 Toyota code diagnosed by a professional: Find a repair shop in your area

Information for Specific Toyota Models

B1825 2013 Toyota RAV4 — Short in Side Squib Left Circuit
B1825 2014 Toyota RAV4 — Short in Side Squib Left Circuit
B1825 2015 Toyota RAV4 — Short in Side Squib Left Circuit
B1825 2016 Toyota RAV4 — Short in Side Squib Left Circuit
B1825 2017 Toyota RAV4 — Short in Side Squib Left Circuit
B1825 2018 Toyota RAV4 — Short in Side Squib Left Circuit

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1825 Toyota Code

1. What are the common symptoms of OBDII code B1825 Toyota (Short in Side Squib Left Circuit)?

- The common symptoms include the airbag warning light staying illuminated on the dashboard and the potential non-deployment of the side airbag in case of an accident.

2. What are the possible causes of OBDII code B1825 Toyota?

- The code B1825 typically indicates a short circuit in the side squib (airbag) left circuit. This can be caused by damaged wiring, a faulty airbag module, or a malfunctioning side squib.

3. How can I diagnose OBDII code B1825 Toyota?

- Diagnosing this code usually involves using a scan tool to retrieve the specific fault code, inspecting the wiring harness and connectors for damage, and performing circuit tests to pinpoint the location of the short circuit.

4. Can I still drive my Toyota with OBDII code B1825?

- It is not recommended to drive the vehicle with an active airbag fault code like B1825, as it can compromise the safety features of the vehicle in the event of an accident. It is advisable to address the issue promptly.

5. How can I repair OBDII code B1825 Toyota?

- Repairing this code typically involves repairing or replacing the damaged wiring, connectors, or components in the side squib left circuit. It is important to follow manufacturer-recommended procedures and safety precautions during the repair process.

6. Is it safe to reset the OBDII code B1825 Toyota without fixing the underlying issue?

- It is not recommended to reset the code without addressing the underlying issue, as it can pose a safety risk in case of an accident. It is important to diagnose and repair the root cause of the code before resetting it.

7. Can a DIY enthusiast fix OBDII code B1825 Toyota?

- While some DIY enthusiasts may have the skills to diagnose and repair simple wiring issues, dealing with airbag systems can be complex and dangerous. It is advisable to seek professional help or consult a service manual before attempting any repairs.

8. How much does it cost to repair OBDII code B1825 Toyota at a dealership?

- The cost of repairing OBDII code B1825 at a dealership can vary depending on the extent of the damage and the specific components that need to be replaced. It is recommended to get a detailed estimate from the dealership before proceeding with the repair.

9. Are there any recalls related to OBDII code B1825 Toyota?

- It is advisable to check with Toyota or the National Highway Traffic Safety Administration (NHTSA) for any recalls related to OBDII code B1825 in your specific Toyota vehicle model. Recalls may be issued for certain vehicles experiencing common airbag system issues.

10. How can I prevent OBDII code B1825 Toyota from recurring?

- To prevent the recurrence of OBDII code B1825, it is important to regularly inspect and maintain the airbag system components, ensure proper installation of aftermarket accessories, and address any wiring issues promptly to avoid short circuits.