AutoCodes – Generic – B1825:02

B1825:02 Code - Driver Seat Recline Position Sensor Circuit Short to Ground

Quick Answer

The Seat Memory Control Module monitors the position of the seat motors by using hall effect position sensors which are an internal part of each motor. Common causes include Faulty Driver Seat Recline Motor, Driver Seat Recline Motor harness is open or shorted, Driver Seat Recline Motor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1825:02 indicates Driver Seat Recline Position Sensor Circuit Short to Ground.
Common causes: Common causes include Faulty Driver Seat Recline Motor, Driver Seat Recline Motor harness is open or shorted, Driver Seat Recline Motor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 344

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 17, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1825:02 Description

The Seat Memory Control Module monitors the position of the seat motors by using hall effect position sensors which are an internal part of each motor. The module supplies each sensor with a 12 V reference circuit only when any seat motor is active, and a low side signal circuit. During seat motor operation, the hall effect position sensor provides a determined number of pulse signals for every revolution of the motor shaft. The scan tool displays these pulse signals as counts that range from 0–65,535. The module counts the feedback pulses from each sensor to determine seat position and end-of-travel limits for each of the seat motors. High scan tool count values indicate forward or upward seat positions while low count values indicate rearward or downward seat positions. The Diagnostic Trouble Code (DTC) will be set when the Driver Seat Memory Control Module detects a short to ground on the sensor signal circuit.

OBDII Code B1825:02 - Driver Seat Recline Position Sensor Circuit Short to Ground - AutoCodes.com — B1825:02 Code - Driver Seat Recline Position Sensor Circuit Short to Ground

What does this mean?

What are the Possible Causes of the DTC B1825:02?

Faulty Driver Seat Recline Motor
Driver Seat Recline Motor harness is open or shorted
Driver Seat Recline Motor circuit poor electrical connection
Faulty Driver Seat Memory Control Module

How to Fix the DTC B1825:02?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B1825:01 Driver Seat Recline Position Sensor Circuit Short to Battery
B1825:02 Driver Seat Recline Position Sensor Circuit Short to Ground
B1825:06 Driver Seat Recline Position Sensor Circuit Low Voltage/Open

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1825:02 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1825:02 code?

Need more information on how to fix the B1825:02 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1825:02 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.