B1823 Scion Code - Short to Positive in Side Squib Right Circuit
Quick Answer
The Front Side Squib Right (RH) circuit consists of the Center Airbag Sensor Assembly and Front Seat Airbag Assembly Right (RH). Common causes include Faulty Front Seat Airbag Assembly Right (RH) (Front Side Squib Right), Front Seat Airbag Assembly Right harness is open or shorted, Front Seat Airbag Assembly Right circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1823 Scion indicates Short to Positive in Side Squib Right Circuit.
- Common causes
- Common causes include Faulty Front Seat Airbag Assembly Right (RH) (Front Side Squib Right), Front Seat Airbag Assembly Right harness is open or shorted, Front Seat Airbag Assembly Right circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1823 Scion Description
What are the Possible Causes of the DTC B1823 Scion?
- Faulty Front Seat Airbag Assembly Right (RH) (Front Side Squib Right)
- Front Seat Airbag Assembly Right harness is open or shorted
- Front Seat Airbag Assembly Right circuit poor electrical connection
- Faulty Center Airbag Sensor Assembly
How to Fix the DTC B1823 Scion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1823 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1823 Scion code?
Need more information on how to fix the B1823 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1823 Scion code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1823 Scion Code
1. What does the OBDII code B1823 mean on a Scion?
B1823 indicates a "Short to Positive in Side Squib Right Circuit," which refers to an electrical issue in the passenger-side airbag system.
2. What are the common symptoms of the B1823 code?
Symptoms include the airbag warning light being illuminated, potential deactivation of the passenger-side airbag, and stored fault codes related to the airbag system.
3. What causes the B1823 code to appear?
Common causes include damaged wiring or connectors, a short circuit to the power supply in the side squib right circuit, or a faulty airbag module.
4. Can I drive my Scion with a B1823 code?
While the car may still operate, it is unsafe to drive with this code because it may disable the passenger-side airbag, increasing the risk of injury in an accident.
5. How do I diagnose a B1823 code?
Start by inspecting the wiring and connectors in the side squib right circuit for damage, corrosion, or disconnection. Use a multimeter to check for short circuits or power supply issues.
6. What tools are needed to fix the B1823 code?
You may need a multimeter for electrical testing, a scan tool to clear the code, and basic tools to inspect and repair wiring or connectors.
7. Can a faulty passenger airbag cause the B1823 code?
Yes, a malfunctioning passenger-side airbag module or its associated wiring can trigger this code.
8. How much does it cost to repair a B1823 code?
Repair costs vary but can range from $100–$300 for wiring repairs to $500 or more if the airbag module needs replacement.
9. Will clearing the code fix the B1823 issue?
Simply clearing the code will not fix the issue. The underlying electrical problem must be addressed to prevent the code from returning.
10. Should I attempt to repair the B1823 code myself?
If you have experience with automotive electrical systems, you can attempt repairs. Otherwise, it’s best to consult a professional, as airbag systems are safety-critical and require careful handling.
Discuss the causes and fixes for B1823 Scion OBDII Code
Code B1823 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
