B1822 Scion Code - Short to Ground in Side Squib Right Circuit
Quick Answer
The Front Side Squib Right (RH) circuit consists of the Center Airbag Sensor Assembly and Front Seat Airbag Assembly Right (RH). Common causes include Faulty Front Seat Airbag Assembly Right (RH) (Front Side Squib Right), Front Seat Airbag Assembly Right harness is open or shorted, Front Seat Airbag Assembly Right circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1822 Scion indicates Short to Ground in Side Squib Right Circuit.
- Common causes
- Common causes include Faulty Front Seat Airbag Assembly Right (RH) (Front Side Squib Right), Front Seat Airbag Assembly Right harness is open or shorted, Front Seat Airbag Assembly Right circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1822 Scion Description
What are the Possible Causes of the DTC B1822 Scion?
- Faulty Front Seat Airbag Assembly Right (RH) (Front Side Squib Right)
- Front Seat Airbag Assembly Right harness is open or shorted
- Front Seat Airbag Assembly Right circuit poor electrical connection
- Faulty Center Airbag Sensor Assembly
How to Fix the DTC B1822 Scion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1822 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1822 Scion code?
Need more information on how to fix the B1822 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1822 Scion code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1822 Scion Code
1. What does the OBDII code B1822 mean in a Scion?
B1822 indicates a "Short to Ground in Side Squib Right Circuit," which refers to an issue in the passenger-side airbag system wiring.
2. What are the symptoms of code B1822 in a Scion?
Common symptoms include the airbag warning light illuminating on the dashboard and possible deactivation of the passenger-side airbag.
3. What causes the B1822 code to appear?
This code is typically caused by damaged wiring, a corroded connector, or a short circuit in the passenger-side airbag system.
4. Can I drive my Scion with the B1822 code active?
While the vehicle may still drive normally, the airbag system may not function correctly, posing a safety risk in an accident.
5. How is the B1822 code diagnosed?
A technician will use a scan tool to confirm the code, then inspect the wiring, connectors, and airbag components in the passenger-side circuit for damage or corrosion.
6. What repairs might fix the B1822 code?
Repairs may include replacing damaged wiring, cleaning or replacing corroded connectors, or replacing a faulty airbag module.
7. Is it expensive to repair the B1822 code on a Scion?
Repair costs depend on the cause. Fixing a wiring issue is often less expensive, while replacing an airbag module can be more costly.
8. Can I reset the B1822 code myself?
Attempting to reset the code without addressing the underlying issue is not recommended, as it may compromise the airbag system's functionality.
9. How can I prevent the B1822 code from recurring?
Regularly inspect and maintain the airbag system's wiring and connectors, especially in areas prone to moisture or physical damage.
10. Should I attempt to fix the B1822 code on my own?
Airbag systems are safety-critical components. It's best to have a qualified technician diagnose and repair this issue to ensure proper functionality.
Discuss the causes and fixes for B1822 Scion OBDII Code
Code B1822 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
