AutoCodesToyota – B1821 2013 Toyota RAV4

B1821 2013 Toyota RAV4 Code - Open in Side Squib Right Circuit

Quick Answer

The Front Side Squib Right (RH) circuit consists of the Center Airbag Sensor Assembly and Front Seat Airbag Assembly Right (RH). Common causes include Faulty Front Seat Airbag Assembly Right (RH) (Front Side Squib Right), Front Seat Airbag Assembly Right harness is open or shorted, Front Seat Airbag Assembly Right circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B1821 2013 Toyota RAV4 indicates Open in Side Squib Right Circuit.
Common causes
Common causes include Faulty Front Seat Airbag Assembly Right (RH) (Front Side Squib Right), Front Seat Airbag Assembly Right harness is open or shorted, Front Seat Airbag Assembly Right circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 546
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Nov 29, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1821 2013 Toyota RAV4 Description

The Front Side Squib Right (RH) circuit consists of the Center Airbag Sensor Assembly and Front Seat Airbag Assembly Right (RH). This circuit instructs the Supplemental Restraint System (SRS) to deploy when deployment conditions are met. The Diagnostic Trouble Code (DTC) is stored when a malfunction is detected in the front side squib RH circuit.
OBDII Code B1821 2013 Toyota RAV4 - Open in Side Squib Right Circuit - AutoCodes.com
B1821 2013 Toyota RAV4 Code - Open in Side Squib Right Circuit

What are the Possible Causes of the DTC B1821 2013 Toyota RAV4?

  • Faulty Front Seat Airbag Assembly Right (RH) (Front Side Squib Right)
  • Front Seat Airbag Assembly Right harness is open or shorted
  • Front Seat Airbag Assembly Right circuit poor electrical connection
  • Faulty Center Airbag Sensor Assembly

How to Fix the DTC B1821 2013 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1821 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1821 2013 Toyota RAV4 code?

Need more information on how to fix the B1821 2013 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1821 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1821 2013 Toyota RAV4 Code

1. What are the common symptoms of OBDII code B1821 in a 2013 Toyota RAV4?

The common symptoms of OBDII code B1821 "Open in Side Squib Right Circuit" in a 2013 Toyota RAV4 may include an illuminated airbag warning light on the dashboard and non-functioning right side airbag.

2. What can cause the OBDII code B1821 in a 2013 Toyota RAV4?

The OBDII code B1821 in a 2013 Toyota RAV4 is typically caused by an open circuit in the side squib (airbag) on the right side of the vehicle.

3. How serious is the OBDII code B1821 in a 2013 Toyota RAV4?

The OBDII code B1821 "Open in Side Squib Right Circuit" in a 2013 Toyota RAV4 is a serious issue as it indicates a fault in the right side airbag system, which may compromise occupant safety in the event of a collision.

4. What is the side squib in a 2013 Toyota RAV4?

The side squib in a 2013 Toyota RAV4 refers to the airbag component located in the right side of the vehicle, designed to deploy in the event of a side impact to protect the occupants.

5. How can I diagnose and repair the OBDII code B1821 in my 2013 Toyota RAV4?

Diagnosing and repairing the OBDII code B1821 "Open in Side Squib Right Circuit" in a 2013 Toyota RAV4 typically involves inspecting the wiring and connectors associated with the right side airbag system and repairing any open circuits found.

6. Can I drive my 2013 Toyota RAV4 with the OBDII code B1821 present?

It is not recommended to drive your 2013 Toyota RAV4 with the OBDII code B1821 present, as it indicates a fault in the airbag system that may affect its functionality in the event of a collision.

7. How much does it cost to repair the OBDII code B1821 in a 2013 Toyota RAV4?

The cost to repair the OBDII code B1821 "Open in Side Squib Right Circuit" in a 2013 Toyota RAV4 can vary depending on the extent of the damage and the labor rates of the repair shop. It is advisable to get a professional diagnosis for an accurate estimate.

8. Are there any safety precautions I should take if the OBDII code B1821 appears in my 2013 Toyota RAV4?

If the OBDII code B1821 appears in your 2013 Toyota RAV4, it is important to take safety precautions by avoiding aggressive driving maneuvers and ensuring all occupants wear seat belts until the issue is resolved.

9. Can I reset the OBDII code B1821 in my 2013 Toyota RAV4 without repairing the issue?

Resetting the OBDII code B1821 in your 2013 Toyota RAV4 without repairing the underlying issue is not recommended, as it may compromise the safety features of the vehicle.

10. How long does it take to repair the OBDII code B1821 in a 2013 Toyota RAV4?

The time it takes to repair the OBDII code B1821 "Open in Side Squib Right Circuit" in a 2013 Toyota RAV4 can vary depending on the extent of the repair needed and the availability of parts. It is best to consult a professional technician for a more accurate timeframe.

Discuss the causes and fixes for B1821 2013 Toyota RAV4 OBDII Code

Code B1821 2013 Toyota RAV4 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play