AutoCodes – Toyota – B1811 2014 Toyota RAV4

B1811 2014 Toyota RAV4 Code - Open In Driver Side Squib 2nd Step Circuit

Quick Answer

The Driver Side Squib 2nd Step Circuit consists of the Center Airbag Sensor Assembly, the Spiral Cable, and the Steering Pad. Common causes include Instrument panel wire, Faulty Spiral cable, Faulty Steering Pad (Driver Side Squib 2nd Step). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1811 2014 Toyota RAV4 indicates Open In Driver Side Squib 2nd Step Circuit.
Common causes: Common causes include Instrument panel wire, Faulty Spiral cable, Faulty Steering Pad (Driver Side Squib 2nd Step).
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 508

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Dec 09, 2022

Description
Possible Causes
How To Fix
Tech Notes ▶
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1811 2014 Toyota RAV4 Description

The Driver Side Squib 2nd Step Circuit consists of the Center Airbag Sensor Assembly, the Spiral Cable, and the Steering Pad. The circuit signals the Supplemental Restraint System (SRS) to deploy when deployment conditions are met. The Diagnostic Trouble Code (DTC) is recorded when a malfunction is detected in the Driver Side Squib 2nd Step Circuit.

OBDII Code B1811 2014 Toyota RAV4 - Open In Driver Side Squib 2nd Step Circuit - AutoCodes.com — B1811 2014 Toyota RAV4 Code - Open In Driver Side Squib 2nd Step Circuit

What does this mean?

What are the Possible Causes of the DTC B1811 2014 Toyota RAV4?

Instrument panel wire
Faulty Spiral cable
Faulty Steering Pad (Driver Side Squib 2nd Step)
Faulty Center Airbag Sensor Assembly

How to Fix the DTC B1811 2014 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

User Submitted Video

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1811 2014 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1811 2014 Toyota RAV4 code?

Need more information on how to fix the B1811 2014 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1811 2014 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1811 2014 Toyota RAV4 Code

1. What are the common symptoms of OBDII code B1811 in a 2014 Toyota RAV4?

The common symptoms of OBDII code B1811 (Open In Driver Side Squib 2nd Step Circuit) in a 2014 Toyota RAV4 may include an illuminated airbag warning light on the dashboard and potential non-deployment of the driver's side airbag in the event of a collision.

2. What can cause the OBDII code B1811 in a 2014 Toyota RAV4?

The OBDII code B1811 in a 2014 Toyota RAV4 is typically triggered by an open circuit in the driver side squib 2nd step circuit, which could be caused by damaged wiring, a faulty airbag module, or a defective clock spring.

3. How serious is OBDII code B1811 in a 2014 Toyota RAV4?

OBDII code B1811 in a 2014 Toyota RAV4 is a serious issue as it indicates a problem with the driver's side airbag system. It is important to address this code promptly to ensure the proper functioning of the airbag in case of an accident.

4. Can I continue driving my 2014 Toyota RAV4 with OBDII code B1811?

It is not recommended to continue driving a 2014 Toyota RAV4 with OBDII code B1811, as the driver's side airbag may not deploy in the event of a collision. It is best to have the issue diagnosed and repaired by a qualified mechanic as soon as possible.

5. How can I diagnose OBDII code B1811 in my 2014 Toyota RAV4?

Diagnosing OBDII code B1811 in a 2014 Toyota RAV4 typically involves using a scan tool to retrieve the fault code and then inspecting the driver side squib 2nd step circuit for any signs of damage or open circuits. A thorough inspection of the airbag system components may also be necessary.

6. What are some repair tips for fixing OBDII code B1811 in a 2014 Toyota RAV4?

Repairing OBDII code B1811 in a 2014 Toyota RAV4 may involve repairing or replacing damaged wiring, replacing the driver's side airbag module, or fixing a faulty clock spring. It is recommended to follow the manufacturer's repair procedures and use genuine parts.

7. Can I reset OBDII code B1811 in my 2014 Toyota RAV4 without fixing the issue?

Resetting OBDII code B1811 in a 2014 Toyota RAV4 without fixing the underlying issue is not recommended, as the problem will persist and potentially compromise the safety of the driver in the event of an accident. It is important to address the root cause of the code.

8. How much does it cost to repair OBDII code B1811 in a 2014 Toyota RAV4?

The cost of repairing OBDII code B1811 in a 2014 Toyota RAV4 can vary depending on the specific cause of the issue and the labor rates in your area. It is advisable to get a diagnosis from a qualified mechanic to determine the exact cost of the repair.

9. Is OBDII code B1811 covered under warranty for a 2014 Toyota RAV4?

Whether OBDII code B1811 is covered under warranty for a 2014 Toyota RAV4 depends on the vehicle's warranty status and the specific terms and conditions of the warranty. It is recommended to consult your vehicle's warranty documentation or contact the dealership for clarification.

10. How can I prevent OBDII code B1811 from occurring in my 2014 Toyota RAV4?

To prevent OBDII code B1811 from occurring in your 2014 Toyota RAV4, it is important to practice regular maintenance, such as checking the airbag system components for signs of wear or damage, and addressing any electrical issues promptly to avoid potential circuit faults.