B1807 2016 Toyota RAV4 Code - Short To Ground In Front Passenger Side Squib Circuit
Quick Answer
The Front Passenger Side Squib Circuit consists of the Center Airbag Sensor Assembly and the Front Passenger Airbag Assembly. Common causes include Instrument panel wire, Faulty Front Passenger Airbag Assembly (Front Passenger Side Squib), Front Passenger Airbag Assembly harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1807 2016 Toyota RAV4 indicates Short To Ground In Front Passenger Side Squib Circuit.
- Common causes
- Common causes include Instrument panel wire, Faulty Front Passenger Airbag Assembly (Front Passenger Side Squib), Front Passenger Airbag Assembly harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1807 2016 Toyota RAV4 Description
What are the Possible Causes of the DTC B1807 2016 Toyota RAV4?
- Instrument panel wire
- Faulty Front Passenger Airbag Assembly (Front Passenger Side Squib)
- Front Passenger Airbag Assembly harness is open or shorted
- Front Passenger Airbag Assembly circuit poor electrical connection
- Faulty Center Airbag Sensor Assembly
How to Fix the DTC B1807 2016 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1807 2016 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1807 2016 Toyota RAV4 code?
Need more information on how to fix the B1807 2016 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1807 2016 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1807 2016 Toyota RAV4 Code
1. What does OBDII code B1807 mean on a 2016 Toyota RAV4?
Code B1807 indicates a short to ground in the front passenger side squib circuit, which is part of the airbag system.
2. What are the common symptoms of code B1807 in a Toyota RAV4?
Common symptoms include the airbag warning light illuminating on the dashboard and the passenger airbag potentially being disabled.
3. What causes the B1807 code to appear?
This code is typically caused by damaged wiring, a faulty passenger airbag squib, a defective clock spring, or a poor connection in the squib circuit.
4. Is it safe to drive a 2016 Toyota RAV4 with code B1807?
It’s not recommended to drive the vehicle without addressing the issue, as the passenger airbag may not deploy properly in the event of a collision.
5. How is the B1807 code diagnosed?
A technician will use a scan tool to confirm the code, inspect the squib circuit wiring and connectors, and test the resistance in the airbag circuit to locate the fault.
6. Can the B1807 code be cleared without repairs?
Clearing the code without fixing the underlying issue will not resolve the problem, and the airbag warning light will likely return.
7. What repairs can fix code B1807?
Repairs may include repairing or replacing damaged wiring, fixing a faulty clock spring, replacing the passenger airbag squib, or reconnecting loose connectors.
8. How much does it cost to fix code B1807 on a Toyota RAV4?
The repair cost will vary depending on the cause, but it can range from $100 for wiring repairs to $1,000+ if the airbag system components need replacement.
9. Can I fix the B1807 code myself?
If you have advanced automotive electrical knowledge and proper tools, you may attempt repairs, but due to the airbag system’s safety importance, professional diagnosis is strongly recommended.
10. What happens if the B1807 code is ignored?
Ignoring the code could result in the passenger airbag not deploying during an accident, compromising passenger safety.
Discuss the causes and fixes for B1807 2016 Toyota RAV4 OBDII Code
Code B1807 2016 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
