B1805 2013 Toyota RAV4 Code - Short In Front Passenger Side Squib Circuit
Quick Answer
The Front Passenger Side Squib Circuit consists of the Center Airbag Sensor Assembly and the Front Passenger Airbag Assembly. Common causes include Instrument panel wire, Faulty Front Passenger Airbag Assembly (Front Passenger Side Squib), Front Passenger Airbag Assembly harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1805 2013 Toyota RAV4 indicates Short In Front Passenger Side Squib Circuit.
- Common causes
- Common causes include Instrument panel wire, Faulty Front Passenger Airbag Assembly (Front Passenger Side Squib), Front Passenger Airbag Assembly harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1805 2013 Toyota RAV4 Description
What are the Possible Causes of the DTC B1805 2013 Toyota RAV4?
- Instrument panel wire
- Faulty Front Passenger Airbag Assembly (Front Passenger Side Squib)
- Front Passenger Airbag Assembly harness is open or shorted
- Front Passenger Airbag Assembly circuit poor electrical connection
- Faulty Center Airbag Sensor Assembly
How to Fix the DTC B1805 2013 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1805 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1805 2013 Toyota RAV4 code?
Need more information on how to fix the B1805 2013 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1805 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1805 2013 Toyota RAV4 Code
1. What does OBDII code B1805 for a 2013 Toyota RAV4 indicate?
This code points to a "Short In Front Passenger Side Squib Circuit," which typically relates to an issue with the airbag system.
2. What are the common symptoms of a B1805 OBDII code in a Toyota RAV4?
Common symptoms include the airbag warning light illuminating on the dashboard and potential non-deployment of the front passenger airbag in case of an accident.
3. What are the possible causes of the B1805 OBDII code in a 2013 Toyota RAV4?
Causes can include a short circuit in the front passenger side airbag system, faulty wiring or connectors, a malfunctioning airbag control module, or a defective squib circuit.
4. How can I diagnose the B1805 code in my Toyota RAV4?
Proper diagnosis involves using a scanner to retrieve the specific fault code, inspecting the wiring and connectors for damage, and testing the airbag system components for continuity.
5. Is it safe to drive with the B1805 OBDII code present in a Toyota RAV4?
It is not recommended to drive with this code active, as it indicates a potential issue with the airbag system, which could compromise passenger safety in the event of a collision.
6. Can I reset the B1805 OBDII code in my Toyota RAV4 on my own?
While you can clear the code using an OBDII scanner, it is crucial to address the underlying issue causing the fault code to prevent it from reoccurring.
7. How much does it cost to repair the B1805 OBDII code in a 2013 Toyota RAV4?
Repair costs can vary depending on the specific cause of the issue, but it may involve replacing damaged wiring, connectors, or components in the airbag system.
8. Are there any DIY tips for fixing the B1805 code in a Toyota RAV4?
DIY repair is not recommended for airbag system issues due to safety concerns. It is best to have a qualified technician diagnose and repair the problem.
9. Will the B1805 code in a Toyota RAV4 affect vehicle performance?
The B1805 code itself may not impact vehicle performance, but it indicates a safety issue with the airbag system that needs to be addressed promptly.
10. How long does it typically take to repair the B1805 OBDII code in a Toyota RAV4?
Repair times can vary based on the exact cause of the issue, but it is advisable to have the problem diagnosed and fixed as soon as possible to ensure the airbag system's proper function.
Discuss the causes and fixes for B1805 2013 Toyota RAV4 OBDII Code
Code B1805 2013 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
