B17FB RAM Code - Auto High Beam Camera View Blocked
Quick Answer
The Diagnostic Trouble Code (DTC) will be set if the target light source is not within the correctable limits of the mirror. Common causes include Smart Beam Calibration. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B17FB RAM indicates Auto High Beam Camera View Blocked.
- Common causes
- Common causes include Smart Beam Calibration.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B17FB RAM Description
How to Fix the DTC B17FB RAM?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B17FB RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B17FB RAM code?
Need more information on how to fix the B17FB RAM code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B17FB RAM code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B17FB RAM Code
1. What are the common symptoms of OBDII code B17FB RAM (Auto High Beam Camera View Blocked)?
- Common symptoms include the inability to engage auto high beam function and a warning message on the dashboard indicating a blocked camera view.
2. What are the possible causes of the Auto High Beam Camera View Blocked code?
- The code B17FB RAM may be triggered by a dirty or obstructed camera lens, a faulty camera module, or wiring issues.
3. How can I diagnose the cause of the Auto High Beam Camera View Blocked error?
- To diagnose the issue, visually inspect the camera lens for dirt or obstructions, check the wiring connections, and use a diagnostic tool to scan for specific faults.
4. What are some tips for repairing OBDII code B17FB RAM?
- Start by cleaning the camera lens with a soft cloth and ensure there are no obstructions blocking the view. If the issue persists, consider replacing the camera module or addressing any wiring problems.
5. Can I reset the Auto High Beam Camera View Blocked code without fixing the underlying issue?
- It is not recommended to reset the code without addressing the root cause, as the problem will likely reoccur and could lead to safety issues related to the high beam functionality.
6. Is it safe to drive with the Auto High Beam Camera View Blocked warning illuminated?
- While the vehicle should still be safe to drive without using the auto high beam function, it is important to address the issue promptly to ensure proper operation of the camera system.
7. How do I prevent the Auto High Beam Camera View Blocked error code from reoccurring?
- Regularly clean the camera lens to prevent dirt buildup, avoid parking in areas where the camera may be obstructed, and conduct routine maintenance to ensure the system functions properly.
8. Can extreme weather conditions affect the Auto High Beam Camera View Blocked code?
- Yes, extreme weather conditions such as heavy snow, rain, or fog may impact the camera's functionality and trigger the B17FB RAM error code.
9. Are there any recalls or technical service bulletins related to the Auto High Beam Camera View Blocked issue?
- It is advisable to check with your vehicle manufacturer or authorized dealer for any recalls or technical service bulletins related to the B17FB RAM code to see if there are known solutions or remedies.
10. How much does it typically cost to repair the Auto High Beam Camera View Blocked problem?
- The cost of repair can vary depending on the specific cause of the issue. Cleaning the camera lens may be a simple and inexpensive fix, while replacing the camera module or addressing wiring problems could be more costly.
Discuss the causes and fixes for B17FB RAM OBDII Code
-
-
The smart beam sensor on your RAM is built into the rearview mirror assembly, right up against the windshield. It's part of the auto high beam system and looks through the glass to detect oncoming headlights or street lighting.
If you're getting a “camera view blocked” message, check for things like a dirty windshield in front of the sensor, tint film, or even frost or condensation. Also, avoid placing any stickers or objects near that area on the glass.
Let me know your exact model and year if you need help with removal or wiring info.
-
-
-
The smart beam sensor, also known as the auto high beam camera or forward-facing camera, is usually located behind the rearview mirror, mounted to the inside of the windshield. On most RAM trucks, it’s part of the windshield-mounted module that handles lane assist and automatic high beam functions.
If you're getting the B17FB code or issues with the auto high beams, make sure nothing is obstructing that camera—like a window tint strip, dirt, or a poorly placed dash cam mount. Also check the windshield for chips or cracks in front of the camera that could distort its view. If the camera or bracket has come loose or misaligned, it can cause the system to think its view is blocked even if it’s not.
Let me know what year and model your RAM is if you need exact removal or inspection instructions.
-
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
