B17F6 Jeep Code - Trailer Tail Lamp Control Circuit Short To Battery
Quick Answer
Four relays are used to provide voltage to the Trailer Tow connector. Common causes include Faulty Trailer Tow Park Lamps Relay, Trailer Tow Park Lamps Relay harness is open or shorted, Trailer Tow Park Lamps Relay circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B17F6 Jeep indicates Trailer Tail Lamp Control Circuit Short To Battery.
- Common causes
- Common causes include Faulty Trailer Tow Park Lamps Relay, Trailer Tow Park Lamps Relay harness is open or shorted, Trailer Tow Park Lamps Relay circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B17F6 Jeep Description
What are the Possible Causes of the DTC B17F6 Jeep?
- Faulty Trailer Tow Park Lamps Relay
- Trailer Tow Park Lamps Relay harness is open or shorted
- Trailer Tow Park Lamps Relay circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC B17F6 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B17F6 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B17F6 Jeep code?
Need more information on how to fix the B17F6 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B17F6 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B17F6 Jeep Code
1. What are the common symptoms of OBDII code B17F6 in a Jeep related to the Trailer Tail Lamp Control Circuit Short To Battery?
- Common symptoms include non-functional trailer tail lamps, flickering lights, or a warning light on the dashboard indicating a problem with the trailer lighting system.
2. What are the possible causes of the B17F6 code in a Jeep?
- The code can be triggered by a short circuit in the wiring harness, a faulty trailer lamp control module, damaged connectors, or water intrusion into the electrical components.
3. How can I diagnose the B17F6 code in my Jeep?
- To diagnose the issue, you can use a diagnostic scanner to read the fault codes, inspect the trailer wiring for any visible damage or corrosion, and test the trailer lamp control module for proper functioning.
4. Can I still drive my Jeep with the B17F6 code present?
- It is not recommended to drive your Jeep with the B17F6 code active, as it indicates a fault in the trailer tail lamp control circuit, which can affect the visibility of your vehicle to other drivers.
5. How can I repair the Trailer Tail Lamp Control Circuit Short To Battery issue in my Jeep?
- Repair options include repairing or replacing damaged wiring, replacing the trailer lamp control module if faulty, checking and cleaning connectors, and ensuring proper water sealing of electrical components.
6. Are there any DIY tips for fixing the B17F6 code in a Jeep?
- DIY enthusiasts can start by visually inspecting the trailer wiring for any obvious damage, checking and cleaning connectors, and using dielectric grease to protect electrical connections from moisture.
7. Will resetting the OBDII code B17F6 in my Jeep make the issue go away?
- Simply resetting the code will not fix the underlying issue causing the B17F6 code. It is important to diagnose the problem and address any faults in the trailer tail lamp control circuit.
8. Is it necessary to visit a mechanic for the B17F6 code in my Jeep?
- While some repairs related to the Trailer Tail Lamp Control Circuit can be done by DIYers, it is recommended to consult a professional mechanic for a comprehensive diagnosis and proper repair of the issue.
9. How much does it typically cost to repair the B17F6 code in a Jeep?
- The cost of repairing the B17F6 code can vary depending on the specific cause of the issue, but it may involve expenses for parts, labor, and diagnostic services. Costs can range from a few hundred to over a thousand dollars.
10. Can the B17F6 code in a Jeep affect the vehicle's overall performance?
- While the B17F6 code is related to the trailer tail lamp control circuit, it does not directly impact the Jeep's overall performance. However, it is crucial to address the issue promptly for safety and compliance with road regulations.
Discuss the causes and fixes for B17F6 Jeep OBDII Code
Code B17F6 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
