B17F3 Chrysler Code - Auto High Beam System Aim
Quick Answer
The Diagnostic Trouble Code (DTC) will be set if the target light source is not within the correctable limits of the mirror. Common causes include Smart Beam Calibration. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B17F3 Chrysler indicates Auto High Beam System Aim.
- Common causes
- Common causes include Smart Beam Calibration.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B17F3 Chrysler Description
How to Fix the DTC B17F3 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B17F3 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B17F3 Chrysler code?
Need more information on how to fix the B17F3 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B17F3 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B17F3 Chrysler Code
1. What does the OBDII code B17F3 on a Chrysler mean?
The B17F3 code refers to an issue with the Auto High Beam System Aim, indicating that the system's calibration or alignment is out of specification.
2. What are the common symptoms of a B17F3 code?
Symptoms may include improper functioning of the auto high beam system, headlights not switching between high and low beams as expected, or warning lights related to the lighting system.
3. What causes the B17F3 code to appear on my Chrysler?
Common causes include misaligned headlights, a malfunctioning auto high beam camera, damage to the windshield obstructing the sensor, or software/calibration issues.
4. Can a dirty windshield cause the B17F3 code?
Yes, dirt, debris, or damage on the windshield in front of the auto high beam camera can obstruct its view and trigger the B17F3 code.
5. How can I fix the B17F3 code on my Chrysler?
Start by cleaning the windshield in front of the camera, ensuring the headlights are properly aligned, and checking for any damage to the auto high beam sensor. If the issue persists, recalibrate or update the system using a diagnostic tool.
6. Do I need to replace parts to fix the B17F3 code?
Not always. Many times, the issue can be resolved by cleaning, realigning the headlights, or recalibrating the system. However, if the sensor or camera is damaged, it may need replacement.
7. Can I still drive my Chrysler with the B17F3 code active?
Yes, you can still drive, but the auto high beam feature may not function properly, potentially reducing night-driving convenience and safety.
8. How much does it cost to fix the B17F3 code?
The cost can vary. Cleaning or alignment is inexpensive, while sensor replacement or recalibration may cost $50 to $300, depending on labor and parts.
9. What tools are needed to address the B17F3 code?
You may need a diagnostic scan tool to clear the code or recalibrate the system, as well as basic tools to adjust headlight alignment.
10. Can a software update resolve the B17F3 code?
Yes, if the issue is due to outdated or incorrect system software, a software update from a Chrysler dealership may resolve the problem.
Discuss the causes and fixes for B17F3 Chrysler OBDII Code
Code B17F3 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
