B17BF Chrysler Code - Left Sidemarker Lamp Control Circuit Overcurrent
Quick Answer
The Totally Integrated Power Module (TIPM) monitors the Left Sidemarker Lamp Control. Common causes include Faulty Left Sidemarker Lamp, Left Sidemarker Lamp Control harness is open or shorted, Left Sidemarker Lamp Control circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B17BF Chrysler indicates Left Sidemarker Lamp Control Circuit Overcurrent.
- Common causes
- Common causes include Faulty Left Sidemarker Lamp, Left Sidemarker Lamp Control harness is open or shorted, Left Sidemarker Lamp Control circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B17BF Chrysler Description
What are the Possible Causes of the DTC B17BF Chrysler?
- Faulty Left Sidemarker Lamp
- Left Sidemarker Lamp Control harness is open or shorted
- Left Sidemarker Lamp Control circuit poor electrical connection
- Faulty Totally Integrated Power Module (TIPM)
How to Fix the DTC B17BF Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B17BF Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B17BF Chrysler code?
Need more information on how to fix the B17BF Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B17BF Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B17BF Chrysler Code
1. What are the common symptoms of OBDII code B17BF in a Chrysler related to the Left Sidemarker Lamp Control Circuit Overcurrent?
- Common symptoms may include the left sidemarker lamp not functioning properly, flickering, or staying on constantly.
2. What can cause the OBDII code B17BF to trigger in a Chrysler?
- Possible causes could be a short circuit in the left sidemarker lamp wiring, a faulty lamp control module, or a damaged wiring harness.
3. How can I diagnose the OBDII code B17BF Left Sidemarker Lamp Control Circuit Overcurrent issue in my Chrysler?
- You can start by visually inspecting the left sidemarker lamp and its wiring for any visible damage or signs of a short circuit. Using a multimeter to test the circuit continuity can also help pinpoint the issue.
4. Is it safe to continue driving my Chrysler with the B17BF OBDII code triggered?
- It is recommended to address the issue promptly to ensure proper functioning of the sidemarker lamp and to prevent any potential electrical problems in the vehicle.
5. Can I repair the OBDII code B17BF Left Sidemarker Lamp Control Circuit Overcurrent issue myself?
- Depending on your automotive repair skills, you may be able to address the problem by replacing the left sidemarker lamp, repairing the wiring, or replacing the lamp control module. However, professional assistance may be needed for complex repairs.
6. Will resetting the OBDII code B17BF clear the issue permanently?
- Resetting the code may temporarily clear the warning, but if the underlying problem causing the overcurrent issue is not addressed, the code is likely to reappear.
7. How much does it typically cost to repair the OBDII code B17BF in a Chrysler at a mechanic or dealership?
- The cost of repair can vary depending on the specific issue causing the overcurrent fault. It is recommended to get a diagnostic from a professional to determine the exact repair cost.
8. Are there any preventive measures to avoid the recurrence of OBDII code B17BF in the future?
- Regularly inspecting the vehicle's lighting system, avoiding water damage to the sidemarker lamps, and ensuring proper wiring connections can help prevent the Left Sidemarker Lamp Control Circuit Overcurrent issue.
9. Can a faulty battery or alternator cause the OBDII code B17BF in a Chrysler?
- While it is less common, electrical issues related to the battery or alternator could potentially contribute to the overcurrent fault triggering the B17BF code. It is advisable to have these components checked as part of the diagnosis.
10. Will the B17BF OBDII code affect the overall performance of my Chrysler vehicle?
- The B17BF code specifically relates to the left sidemarker lamp control circuit, so it should not significantly impact the overall performance of the vehicle. However, addressing the issue promptly is still recommended for safety and proper functionality.
Discuss the causes and fixes for B17BF Chrysler OBDII Code
Code B17BF Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
