AutoCodes – Toyota – B1796 Toyota

B1796 Toyota Code - Sleep Operation Failure of Occupant Classification ECU

Quick Answer

During sleep mode, the Occupant Detection ECU monitors the condition of each sensor while the ignition switch is off. Common causes include Faulty Occupant Detection ECU, Occupant Detection ECU harness is open or shorted, Occupant Detection ECU circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1796 Toyota indicates Sleep Operation Failure of Occupant Classification ECU.
Common causes: Common causes include Faulty Occupant Detection ECU, Occupant Detection ECU harness is open or shorted, Occupant Detection ECU circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,331

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 20, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1796 Toyota Description

During sleep mode, the Occupant Detection ECU monitors the condition of each sensor while the ignition switch is off. In this mode, if the Occupant Detection ECU detects an internal malfunction, the Diagnostic Trouble Code (DTC) B1796 is stored.

OBDII Code B1796 Toyota - Sleep Operation Failure of Occupant Classification ECU - AutoCodes.com — B1796 Toyota Code - Sleep Operation Failure of Occupant Classification ECU

What does this mean?

What are the Possible Causes of the DTC B1796 Toyota?

Faulty Occupant Detection ECU
Occupant Detection ECU harness is open or shorted
Occupant Detection ECU circuit poor electrical connection

How to Fix the DTC B1796 Toyota?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1796 Toyota code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1796 Toyota code?

Need more information on how to fix the B1796 Toyota code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1796 Toyota code diagnosed by a professional: Find a repair shop in your area

Information for Specific Toyota Models

B1796 2013 Toyota RAV4 — Sleep Operation Failure of Occupant Classification ECU
B1796 2014 Toyota RAV4 — Sleep Operation Failure of Occupant Classification ECU
B1796 2015 Toyota RAV4 — Sleep Operation Failure of Occupant Classification ECU
B1796 2016 Toyota RAV4 — Sleep Operation Failure of Occupant Classification ECU
B1796 2017 Toyota RAV4 — Sleep Operation Failure of Occupant Classification ECU
B1796 2018 Toyota RAV4 — Sleep Operation Failure of Occupant Classification ECU

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1796 Toyota Code

1. What are the common symptoms of OBDII code B1796 Toyota related to the Sleep Operation Failure of Occupant Classification ECU?

- Common symptoms include the airbag warning light staying illuminated, the passenger airbag being deactivated, and potential issues with the seat belt warning system.

2. What typically causes the Sleep Operation Failure of Occupant Classification ECU (B1796) in a Toyota vehicle?

- The B1796 code is often caused by a malfunction in the Occupant Classification ECU, faulty wiring connections, or a software glitch in the system.

3. How serious is the B1796 OBDII code related to the Occupant Classification ECU in a Toyota?

- The B1796 code is a serious issue as it affects the proper functioning of the occupant classification system, which is crucial for the correct deployment of airbags in the event of a collision.

4. Can I continue driving my Toyota with the B1796 code present?

- It is not recommended to drive your vehicle with the B1796 code active, as it may compromise the safety features related to the airbag system.

5. How can I diagnose and repair the B1796 code in my Toyota related to the Occupant Classification ECU?

- Diagnosis typically involves using an OBDII scanner to read the code and then inspecting the Occupant Classification ECU, wiring harness, and connections for any issues. Repair may involve replacing the faulty ECU, repairing wiring, or updating software.

6. Will resetting the OBDII code B1796 on my Toyota fix the issue temporarily?

- Resetting the code may temporarily clear the warning light, but if the underlying issue with the Occupant Classification ECU is not addressed, the code is likely to reappear.

7. How much does it cost to repair the B1796 code related to the Occupant Classification ECU in a Toyota?

- The cost of repair can vary depending on the specific issue causing the code, but it may range from a few hundred to over a thousand dollars, including parts and labor.

8. Can I fix the B1796 code in my Toyota at home, or do I need to take it to a professional mechanic?

- While some DIY enthusiasts may attempt to diagnose and repair the B1796 code themselves, it is recommended to consult a professional mechanic due to the complexity of the airbag system and safety implications.

9. Are there any recalls or service bulletins related to the B1796 code in Toyota vehicles?

- It is advisable to check with a Toyota dealership or the manufacturer's website for any recalls or service bulletins related to the B1796 code, as some vehicles may be covered under warranty for this issue.

10. How can I prevent the recurrence of the B1796 code in my Toyota after repair?

- To prevent the B1796 code from reoccurring, it is essential to ensure proper installation and connection of the Occupant Classification ECU, as well as regular maintenance and inspection of the airbag system in your vehicle.