B1796 Scion Code - Sleep Operation Failure of Occupant Classification ECU
Quick Answer
During sleep mode, the Occupant Detection ECU monitors the condition of each sensor while the ignition switch is off. Common causes include Faulty Occupant Detection ECU, Occupant Detection ECU harness is open or shorted, Occupant Detection ECU circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1796 Scion indicates Sleep Operation Failure of Occupant Classification ECU.
- Common causes
- Common causes include Faulty Occupant Detection ECU, Occupant Detection ECU harness is open or shorted, Occupant Detection ECU circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1796 Scion Description
What are the Possible Causes of the DTC B1796 Scion?
- Faulty Occupant Detection ECU
- Occupant Detection ECU harness is open or shorted
- Occupant Detection ECU circuit poor electrical connection
How to Fix the DTC B1796 Scion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1796 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1796 Scion code?
Need more information on how to fix the B1796 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1796 Scion code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1796 Scion Code
1. What are the common symptoms of OBDII code B1796 in a Scion related to the Occupant Classification ECU?
The common symptoms include the airbag warning light staying illuminated, the passenger airbag not deploying in an accident, and potential issues with the seat belt reminder system.
2. What causes the Sleep Operation Failure of Occupant Classification ECU in a Scion?
This code is typically triggered by a malfunction in the Occupant Classification ECU, which can be caused by electrical faults, software glitches, or internal component failures.
3. How can I diagnose the Sleep Operation Failure of Occupant Classification ECU in my Scion?
Diagnosing this issue usually involves using an OBDII scanner to retrieve the specific B1796 code, and then further inspection of the Occupant Classification ECU, wiring, and associated components for any visible damage or faults.
4. Is it safe to drive my Scion with the B1796 code related to the Occupant Classification ECU?
It is not recommended to drive the vehicle with this code present, as it could affect the proper deployment of the airbags and compromise the safety of the occupants in case of an accident.
5. Can I reset the B1796 code related to the Occupant Classification ECU in my Scion?
While you can clear the code with an OBDII scanner, it is important to address the underlying issue causing the code to prevent it from reoccurring and potentially putting your safety at risk.
6. What are some repair tips for fixing the Sleep Operation Failure of Occupant Classification ECU in a Scion?
Repair tips may include checking and repairing any damaged wiring, updating the software of the ECU if applicable, and replacing the Occupant Classification ECU if necessary.
7. How much does it cost to repair the B1796 code related to the Occupant Classification ECU in a Scion?
The cost of repair can vary depending on the exact cause of the issue, but it may involve anywhere from a couple of hundred dollars for simple fixes to over a thousand dollars for more complex repairs like ECU replacement.
8. Can a DIY enthusiast fix the Sleep Operation Failure of Occupant Classification ECU issue in a Scion?
While some basic troubleshooting steps can be done by a DIY enthusiast, diagnosing and repairing issues related to the Occupant Classification ECU often require advanced knowledge and specialized tools, making it more suitable for professional mechanics.
9. Are there any recalls or technical service bulletins related to the B1796 code in Scion vehicles?
It's recommended to check with your local Scion dealership or online resources for any recalls or technical service bulletins related to the Sleep Operation Failure of Occupant Classification ECU issue in your specific Scion model.
10. How can I prevent the B1796 code from occurring in my Scion in the future?
Regular maintenance, avoiding water damage to the ECU, and addressing any warning signs promptly can help prevent the occurrence of the Sleep Operation Failure of Occupant Classification ECU issue in your Scion.
Discuss the causes and fixes for B1796 Scion OBDII Code
Code B1796 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
