AutoCodes – Toyota – B1785 2018 Toyota RAV4

B1785 2018 Toyota RAV4 Code - Front Occupant Classification Sensor Left Collision Detection

Quick Answer

The Diagnostic Trouble Code (DTC) B1785 is output when the Occupant Detection ECU receives a collision detection signal sent by the Front Occupant Classification Sensor Left (LH) when an accident occurs. Common causes include Faulty Separate Type Front Seat Cushion Spring Assembly Left (Front Occupant Classification Sensor Left), Separate Type Front Seat Cushion Spring Assembly Left harness is open or shorted, Separate Type Front Seat Cushion Spring Assembly Left circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1785 2018 Toyota RAV4 indicates Front Occupant Classification Sensor Left Collision Detection.
Common causes: Common causes include Faulty Separate Type Front Seat Cushion Spring Assembly Left (Front Occupant Classification Sensor Left), Separate Type Front Seat Cushion Spring Assembly Left harness is open or shorted, Separate Type Front Seat Cushion Spring Assembly Left circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 322

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 16, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1785 2018 Toyota RAV4 Description

The Diagnostic Trouble Code (DTC) B1785 is output when the Occupant Detection ECU receives a collision detection signal sent by the Front Occupant Classification Sensor Left (LH) when an accident occurs. DTC B1785 is also stored when the separate type of front seat cushion spring assembly is subjected to a strong impact, even if an actual accident has not occurred. However, when the Occupant Detection ECU outputs a collision detection signal, even if the vehicle is not in a collision, DTC B1785 can be cleared by performing the zero point calibration and sensitivity check. Therefore, when DTC B1785 is output, first perform the zero point calibration and sensitivity check.

OBDII Code B1785 2018 Toyota RAV4 - Front Occupant Classification Sensor Left Collision Detection - AutoCodes.com — B1785 2018 Toyota RAV4 Code - Front Occupant Classification Sensor Left Collision Detection

What does this mean?

What are the Possible Causes of the DTC B1785 2018 Toyota RAV4?

Faulty Separate Type Front Seat Cushion Spring Assembly Left (Front Occupant Classification Sensor Left)
Separate Type Front Seat Cushion Spring Assembly Left harness is open or shorted
Separate Type Front Seat Cushion Spring Assembly Left circuit poor electrical connection
Faulty Occupant Detection ECU

How to Fix the DTC B1785 2018 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1785 2018 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1785 2018 Toyota RAV4 code?

Need more information on how to fix the B1785 2018 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1785 2018 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1785 2018 Toyota RAV4 Code

1. What does the OBDII code B1785 for a 2018 Toyota RAV4 indicate?

The code B1785 refers to a fault in the Front Occupant Classification Sensor Left Collision Detection system in a 2018 Toyota RAV4.

2. What are the common symptoms of a B1785 fault in a 2018 Toyota RAV4?

Common symptoms include the airbag warning light being illuminated on the dashboard, and the airbag system may be disabled or malfunctioning.

3. What are the possible causes of the B1785 code in a 2018 Toyota RAV4?

Possible causes include a faulty front occupant classification sensor, wiring issues, a malfunctioning airbag control module, or a problem with the collision detection system.

4. How can I diagnose a B1785 fault in my 2018 Toyota RAV4?

Diagnosis typically involves using an OBDII scanner to read the code, inspecting the wiring and connectors related to the front occupant classification sensor, and conducting a thorough visual inspection of the sensor itself.

5. Can I still drive my 2018 Toyota RAV4 with the B1785 code present?

It is not recommended to drive the vehicle with the B1785 code active, as it indicates a potential issue with the airbag system, which is a critical safety component.

6. How can I repair a B1785 fault in my 2018 Toyota RAV4?

Repairing the issue may involve replacing the front occupant classification sensor, repairing any damaged wiring, resetting the airbag system, or reprogramming the airbag control module.

7. Is it safe to reset the B1785 code in my 2018 Toyota RAV4 without addressing the underlying issue?

Resetting the code without fixing the underlying problem will likely result in the code reappearing, and it may compromise the safety of the airbag system.

8. Can a DIY enthusiast fix a B1785 fault in a 2018 Toyota RAV4?

While some aspects of diagnosing and repairing the issue may be suitable for DIY enthusiasts, working on the airbag system can be complex and dangerous. It is recommended to seek professional help.

9. How much does it cost to repair a B1785 fault in a 2018 Toyota RAV4?

The cost of repair can vary depending on the specific cause of the issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.

10. How often does the B1785 code occur in 2018 Toyota RAV4 vehicles?

The occurrence of the B1785 code in 2018 Toyota RAV4 vehicles is relatively rare, but it is essential to address it promptly due to its impact on the airbag system's functionality and safety.