AutoCodes – Toyota – B1785 2013 Toyota RAV4

B1785 2013 Toyota RAV4 Code - Front Occupant Classification Sensor Left Collision Detection

Quick Answer

The Diagnostic Trouble Code (DTC) B1785 is output when the Occupant Detection ECU receives a collision detection signal sent by the Front Occupant Classification Sensor Left (LH) when an accident occurs. Common causes include Faulty Separate Type Front Seat Cushion Spring Assembly Left (Front Occupant Classification Sensor Left), Separate Type Front Seat Cushion Spring Assembly Left harness is open or shorted, Separate Type Front Seat Cushion Spring Assembly Left circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1785 2013 Toyota RAV4 indicates Front Occupant Classification Sensor Left Collision Detection.
Common causes: Common causes include Faulty Separate Type Front Seat Cushion Spring Assembly Left (Front Occupant Classification Sensor Left), Separate Type Front Seat Cushion Spring Assembly Left harness is open or shorted, Separate Type Front Seat Cushion Spring Assembly Left circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 300

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 16, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1785 2013 Toyota RAV4 Description

The Diagnostic Trouble Code (DTC) B1785 is output when the Occupant Detection ECU receives a collision detection signal sent by the Front Occupant Classification Sensor Left (LH) when an accident occurs. DTC B1785 is also stored when the separate type of front seat cushion spring assembly is subjected to a strong impact, even if an actual accident has not occurred. However, when the Occupant Detection ECU outputs a collision detection signal, even if the vehicle is not in a collision, DTC B1785 can be cleared by performing the zero point calibration and sensitivity check. Therefore, when DTC B1785 is output, first perform the zero point calibration and sensitivity check.

OBDII Code B1785 2013 Toyota RAV4 - Front Occupant Classification Sensor Left Collision Detection - AutoCodes.com — B1785 2013 Toyota RAV4 Code - Front Occupant Classification Sensor Left Collision Detection

What does this mean?

What are the Possible Causes of the DTC B1785 2013 Toyota RAV4?

Faulty Separate Type Front Seat Cushion Spring Assembly Left (Front Occupant Classification Sensor Left)
Separate Type Front Seat Cushion Spring Assembly Left harness is open or shorted
Separate Type Front Seat Cushion Spring Assembly Left circuit poor electrical connection
Faulty Occupant Detection ECU

How to Fix the DTC B1785 2013 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1785 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1785 2013 Toyota RAV4 code?

Need more information on how to fix the B1785 2013 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1785 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1785 2013 Toyota RAV4 Code

1. What does OBDII code B1785 for the Front Occupant Classification Sensor Left Collision Detection in a 2013 Toyota RAV4 indicate?

This code typically indicates a malfunction in the front occupant classification sensor on the left side related to collision detection.

2. What are the common symptoms of a B1785 OBDII code in a 2013 Toyota RAV4?

Common symptoms include the airbag warning light illuminating on the dashboard, potential non-deployment of the airbag system during a collision, and diagnostic trouble codes related to the front occupant classification sensor.

3. What are the possible causes of the B1785 OBDII code in a 2013 Toyota RAV4?

Possible causes include a faulty front occupant classification sensor, wiring issues in the sensor circuit, a damaged sensor due to impact, or a malfunction in the airbag control module.

4. How can I diagnose the B1785 OBDII code in my 2013 Toyota RAV4?

Diagnosis typically involves using an OBDII scanner to retrieve the specific code, inspecting the front occupant classification sensor and its wiring for any visible damage, and performing a thorough system check to identify the root cause.

5. Can I repair the B1785 OBDII code in my 2013 Toyota RAV4 myself?

While some basic troubleshooting like checking connections and wiring is possible, repairing the front occupant classification sensor or related components may require specialized tools and expertise, so it's recommended to consult a professional mechanic.

6. Is it safe to drive my 2013 Toyota RAV4 with the B1785 OBDII code present?

It is not advisable to drive the vehicle with an active airbag-related fault code like B1785, as it may compromise the functionality of the airbag system and pose a safety risk in the event of a collision.

7. How much does it cost to repair the B1785 OBDII code in a 2013 Toyota RAV4?

The cost of repairs can vary depending on the exact cause of the code, the parts needed, and labor charges. It's best to get a diagnostic assessment from a qualified mechanic to determine the total repair cost.

8. Can resetting the OBDII system clear the B1785 code in my 2013 Toyota RAV4?

Resetting the OBDII system may temporarily clear the code, but if the underlying issue with the front occupant classification sensor is not addressed, the code is likely to reappear. It's crucial to diagnose and fix the root cause of the problem.

9. Are there any recalls or technical service bulletins related to the B1785 OBDII code in a 2013 Toyota RAV4?

It's recommended to check with Toyota dealerships or visit the National Highway Traffic Safety Administration (NHTSA) website to see if there are any recalls or technical service bulletins related to the front occupant classification sensor issue in your specific vehicle.

10. How can I prevent the B1785 OBDII code from reoccurring in my 2013 Toyota RAV4?

Regular maintenance, timely repairs of any airbag system components, and addressing any issues with the front occupant classification sensor promptly can help prevent the B1785 code from reoccurring in the future.