AutoCodesGMC – B1745 2015 GMC Sierra

B1745 2015 GMC Sierra Code - Driver Seat Rear Up Switch Circuit

Quick Answer

The Seat Memory Control Module supplies a reference voltage to each signal circuit of the Driver Seat Adjuster Switch. Common causes include Faulty Driver Seat Adjuster Switch, Driver Seat Adjuster Switch harness is open or shorted, Driver Seat Adjuster Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B1745 2015 GMC Sierra indicates Driver Seat Rear Up Switch Circuit.
Common causes
Common causes include Faulty Driver Seat Adjuster Switch, Driver Seat Adjuster Switch harness is open or shorted, Driver Seat Adjuster Switch circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 151
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Apr 24, 2023
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1745 2015 GMC Sierra Description

The Seat Memory Control Module supplies a reference voltage to each signal circuit of the Driver Seat Adjuster Switch. When the power seat or lumbar switches are pressed, the appropriate signal circuit from the Seat Memory Control Module is pulled low through the switch contacts indicating the power seat command. The Seat Memory Control Module then commands the driver seat or lumbar to move in response to the switch signals. The Diagnostic Trouble Code (DTC) will be set when there is a short to ground on a switch signal circuit.
OBDII Code B1745 2015 GMC Sierra - Driver Seat Rear Up Switch Circuit - AutoCodes.com
B1745 2015 GMC Sierra Code - Driver Seat Rear Up Switch Circuit

What are the Possible Causes of the DTC B1745 2015 GMC Sierra?

  • Faulty Driver Seat Adjuster Switch
  • Driver Seat Adjuster Switch harness is open or shorted
  • Driver Seat Adjuster Switch circuit poor electrical connection
  • Faulty Seat Memory Control Module

How to Fix the DTC B1745 2015 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1745 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1745 2015 GMC Sierra code?

Need more information on how to fix the B1745 2015 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1745 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1745 2015 GMC Sierra Code

1. What does the OBDII code B1745 mean on a 2015 GMC Sierra?

B1745 indicates an issue with the Driver Seat Rear Up Switch Circuit, which controls the rear tilt adjustment of the driver’s seat.

2. What are the symptoms of code B1745 in a 2015 GMC Sierra?

The driver’s seat rear height adjustment may not work, or the switch may respond intermittently or not at all.

3. What causes the B1745 code to trigger?

Common causes include a faulty seat switch, damaged wiring or connectors in the circuit, or an issue with the seat motor.

4. Can a blown fuse cause the B1745 code?

Yes, a blown fuse related to the seat adjustment system can cause this code and should be checked during diagnosis.

5. How do I test the Driver Seat Rear Up Switch Circuit on my GMC Sierra?

Inspect the switch, wiring, and connectors for damage or corrosion. Use a multimeter to check for continuity and proper voltage in the circuit.

6. Can the B1745 code be cleared without fixing the issue?

Clearing the code without addressing the underlying problem will likely result in the code returning as the fault persists.

7. How much does it cost to fix the B1745 code on a 2015 GMC Sierra?

The cost varies depending on the issue. Replacing a switch might cost $50-$150, while wiring repairs or motor replacement could be more expensive.

8. Can I drive my GMC Sierra with the B1745 code?

Yes, you can drive the vehicle, but the driver’s seat adjustment may not function properly, which could affect comfort and ergonomics.

9. Is the B1745 code covered under warranty for a 2015 GMC Sierra?

It depends on your warranty coverage and mileage. Check with your dealership to see if seat adjustment system repairs are included.

10. Can a bad seat motor trigger the B1745 code?

Yes, a malfunctioning seat motor can cause the system to detect a fault in the Driver Seat Rear Up Switch Circuit, triggering the code.

Discuss the causes and fixes for B1745 2015 GMC Sierra OBDII Code

Code B1745 2015 GMC Sierra comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play