B1733 KIA Code - Anchor Pretensioner Front-Driver Resistance Circuit Short To Battery
Quick Answer
Driver Anchor Pretensioner operates as well as Belt Pretensioner at the same time it gets into its deploy condition after a collision. Common causes include Faulty Anchor Pretensioner Front-Driver, Anchor Pretensioner Front-Driver harness is open or shorted, Anchor Pretensioner Front-Driver circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1733 KIA indicates Anchor Pretensioner Front-Driver Resistance Circuit Short To Battery.
- Common causes
- Common causes include Faulty Anchor Pretensioner Front-Driver, Anchor Pretensioner Front-Driver harness is open or shorted, Anchor Pretensioner Front-Driver circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1733 KIA Description
What are the Possible Causes of the DTC B1733 KIA?
- Faulty Anchor Pretensioner Front-Driver
- Anchor Pretensioner Front-Driver harness is open or shorted
- Anchor Pretensioner Front-Driver circuit poor electrical connection
- Faulty Supplemental Restraints System Control Module (SRSCM)
How to Fix the DTC B1733 KIA?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1733 KIA code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1733 KIA code?
Need more information on how to fix the B1733 KIA code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1733 KIA code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1733 KIA Code
1. What are the common symptoms of OBDII code B1733 in a KIA vehicle?
The common symptoms include the airbag warning light being illuminated on the dashboard and possible non-deployment of the driver's side airbag in the event of a collision.
2. What does the OBDII code B1733 for Anchor Pretensioner Front-Driver Resistance Circuit Short To Battery mean?
This code indicates a problem with the front driver's seat belt pretensioner system in a KIA vehicle, specifically a short circuit to the battery.
3. What are the possible causes of OBDII code B1733 in a KIA car?
Possible causes include damaged wiring in the front driver's seat belt pretensioner system, a faulty pretensioner unit, or a short circuit in the circuit related to the battery.
4. How can I diagnose the issue related to OBDII code B1733 in my KIA vehicle?
Diagnosis involves inspecting the wiring harness and connectors in the front driver's seat belt pretensioner system, checking for any visible damage or shorts, and using a multimeter to measure resistance.
5. Is it safe to drive my KIA with OBDII code B1733 present?
It is not recommended to drive the vehicle with this code active, as it indicates a potential safety issue with the driver's side airbag system. Have the problem diagnosed and repaired as soon as possible.
6. Can I reset the OBDII code B1733 in my KIA by disconnecting the battery?
While disconnecting the battery may clear the code temporarily, it is not a recommended solution as the underlying issue causing the code will still be present. It's best to diagnose and fix the problem correctly.
7. What are some repair tips for fixing OBDII code B1733 in a KIA?
Repair tips include checking and repairing any damaged wiring, replacing the faulty pretensioner unit if necessary, and ensuring all connections are secure and free of corrosion.
8. How much does it typically cost to repair OBDII code B1733 in a KIA?
The cost of repair can vary depending on the extent of the damage and the parts needed. It's recommended to consult with a qualified mechanic or dealership for an accurate estimate.
9. Can OBDII code B1733 be a recurring issue in KIA vehicles?
If the underlying problem causing the code is not properly addressed, it can potentially recur. Ensure that the repair is done correctly to prevent the code from coming back.
10. Is it possible to fix OBDII code B1733 in a KIA at home, or do I need to take it to a professional?
While some DIY enthusiasts may attempt to diagnose and fix this issue at home, it's recommended to seek the expertise of a professional mechanic or dealership due to the safety implications of airbag systems.
Discuss the causes and fixes for B1733 KIA OBDII Code
Code B1733 KIA comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
