AutoCodes – KIA – B1732 KIA

B1732 KIA Code - Anchor Pretensioner Front-Driver Resistance Circuit Short To Ground

Quick Answer

Driver Anchor Pretensioner operates as well as Belt Pretensioner at the same time it gets into its deploy condition after a collision. Common causes include Faulty Anchor Pretensioner Front-Driver, Anchor Pretensioner Front-Driver harness is open or shorted, Anchor Pretensioner Front-Driver circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1732 KIA indicates Anchor Pretensioner Front-Driver Resistance Circuit Short To Ground.
Common causes: Common causes include Faulty Anchor Pretensioner Front-Driver, Anchor Pretensioner Front-Driver harness is open or shorted, Anchor Pretensioner Front-Driver circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,167

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 26, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1732 KIA Description

Driver Anchor Pretensioner operates as well as Belt Pretensioner at the same time it gets into its deploy condition after a collision. It is located at near anchor on the driver seat and it is an equipment to make up for the existing short stroke. The Driver Anchor Pretensioner is supported by two cables and it is an auxiliary equipment to prevent a driver from breaking away doubly as the seat belt is being pulled toward anchor side after a collision.

OBDII Code B1732 KIA - Anchor Pretensioner Front-Driver Resistance Circuit Short To Ground - AutoCodes.com — B1732 KIA Code - Anchor Pretensioner Front-Driver Resistance Circuit Short To Ground

What does this mean?

What are the Possible Causes of the DTC B1732 KIA?

Faulty Anchor Pretensioner Front-Driver
Anchor Pretensioner Front-Driver harness is open or shorted
Anchor Pretensioner Front-Driver circuit poor electrical connection
Faulty Supplemental Restraints System Control Module (SRSCM)

How to Fix the DTC B1732 KIA?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1732 KIA code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1732 KIA code?

Need more information on how to fix the B1732 KIA code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1732 KIA code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1732 KIA Code

1. What are common symptoms of OBDII code B1732 in a KIA related to the Anchor Pretensioner Front-Driver Resistance Circuit Short To Ground?

- Common symptoms include the airbag warning light staying illuminated on the dashboard and potential failure of the driver's seat belt pretensioner system.

2. What could cause the Anchor Pretensioner Front-Driver Resistance Circuit Short To Ground error code B1732 in a KIA?

- The most common cause is a short circuit to ground in the wiring of the driver's seat belt pretensioner system.

3. How can I diagnose the Anchor Pretensioner Front-Driver Resistance Circuit Short To Ground issue in my KIA when OBDII code B1732 is triggered?

- Use a multimeter to check for continuity and resistance in the wiring harness, connectors, and the driver's seat belt pretensioner unit.

4. Is it safe to drive my KIA with the B1732 code indicating the Anchor Pretensioner Front-Driver Resistance Circuit Short To Ground?

- It is not recommended to drive the vehicle with this code as it may affect the proper functioning of the seat belt pretensioner system in case of a collision.

5. Can I reset the B1732 OBDII code related to the Anchor Pretensioner Front-Driver Resistance Circuit Short To Ground in my KIA?

- Resetting the code may temporarily turn off the warning light, but it is crucial to address the underlying issue causing the fault to ensure safety.

6. How should I repair the Anchor Pretensioner Front-Driver Resistance Circuit Short To Ground problem in my KIA?

- Repair typically involves locating and repairing the short circuit in the wiring, replacing damaged components, and ensuring proper connections in the driver's seat belt pretensioner system.

7. Are there any recalls or service bulletins related to OBDII code B1732 in KIA vehicles?

- Check with your local KIA dealership or visit the manufacturer's website to find out if there are any recalls or service bulletins related to this specific OBDII code.

8. Can a DIY enthusiast fix the Anchor Pretensioner Front-Driver Resistance Circuit Short To Ground issue triggered by OBDII code B1732?

- While some basic troubleshooting can be done by DIY enthusiasts, it is recommended to seek professional help for proper diagnosis and repair of the seat belt pretensioner system.

9. How much does it typically cost to repair the Anchor Pretensioner Front-Driver Resistance Circuit Short To Ground fault in a KIA?

- Repair costs can vary depending on the extent of the damage and parts that need replacement, but it is advisable to budget for potentially significant expenses to ensure safety.

10. What are the potential risks of ignoring the B1732 OBDII code related to the Anchor Pretensioner Front-Driver Resistance Circuit Short To Ground in my KIA?

- Ignoring this code can compromise the effectiveness of the seat belt pretensioner system, putting the driver at risk of injury in the event of a collision.