AutoCodes – Hyundai – B1731 Hyundai

B1731 Hyundai Code - Anchor Pretensioner Front-Driver Resistance Too Low

Quick Answer

Driver Anchor Pretensioner operates as well as Belt Pretensioner at the same time it gets into its deploy condition after a collision. Common causes include Faulty Anchor Pretensioner Front-Driver, Anchor Pretensioner Front-Driver harness is open or shorted, Anchor Pretensioner Front-Driver circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1731 Hyundai indicates Anchor Pretensioner Front-Driver Resistance Too Low.
Common causes: Common causes include Faulty Anchor Pretensioner Front-Driver, Anchor Pretensioner Front-Driver harness is open or shorted, Anchor Pretensioner Front-Driver circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,736

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 26, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1731 Hyundai Description

Driver Anchor Pretensioner operates as well as Belt Pretensioner at the same time it gets into its deploy condition after a collision. It is located at near anchor on the driver seat and it is an equipment to make up for the existing short stroke. The Driver Anchor Pretensioner is supported by two cables and it is an auxiliary equipment to prevent a driver from breaking away doubly as the seat belt is being pulled toward anchor side after a collision.

OBDII Code B1731 Hyundai - Anchor Pretensioner Front-Driver Resistance Too Low - AutoCodes.com — B1731 Hyundai Code - Anchor Pretensioner Front-Driver Resistance Too Low

What does this mean?

What are the Possible Causes of the DTC B1731 Hyundai?

Faulty Anchor Pretensioner Front-Driver
Anchor Pretensioner Front-Driver harness is open or shorted
Anchor Pretensioner Front-Driver circuit poor electrical connection
Faulty Supplemental Restraints System Control Module (SRSCM)

How to Fix the DTC B1731 Hyundai?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1731 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1731 Hyundai code?

Need more information on how to fix the B1731 Hyundai code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1731 Hyundai code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1731 Hyundai Code

1. What are the common symptoms of OBDII code B1731 in a Hyundai?

- Common symptoms include the airbag warning light illuminating on the dashboard and a potential message indicating "Anchor Pretensioner Front-Driver Resistance Too Low."

2. What can cause the OBDII code B1731 to appear in a Hyundai?

- This code is often triggered by a fault in the front-driver anchor pretensioner system, which may be caused by a loose connection, damaged wiring, or a faulty pretensioner itself.

3. How serious is the issue indicated by OBDII code B1731 in a Hyundai?

- This issue is related to the front-driver anchor pretensioner system, which is crucial for the proper functioning of the seatbelt and airbag system. It should be addressed promptly to ensure the safety features work correctly in case of a collision.

4. How can I diagnose the OBDII code B1731 in my Hyundai?

- Diagnosing this code usually involves using a diagnostic scanner to retrieve the specific code, followed by inspecting the front-driver anchor pretensioner system for any visible damage or issues.

5. Can I repair the OBDII code B1731 issue in my Hyundai myself?

- Repairing this issue may require advanced knowledge and tools, so it is recommended to have a qualified technician or mechanic diagnose and repair the front-driver anchor pretensioner system to ensure proper functionality and safety compliance.

6. Are there any safety risks associated with ignoring OBDII code B1731 in a Hyundai?

- Ignoring this code could result in the front-driver anchor pretensioner system not deploying properly in the event of a collision, potentially compromising the effectiveness of the seatbelt and airbag system.

7. How much does it typically cost to repair OBDII code B1731 in a Hyundai?

- The cost of repairing this code can vary depending on the extent of the issue and whether any parts need to be replaced. It is advisable to get a professional diagnosis to determine the exact repair cost.

8. Can resetting the OBDII code B1731 in a Hyundai make the issue go away?

- Resetting the code may temporarily turn off the warning light, but it will not fix the underlying problem causing the code to appear. It is crucial to address the root cause of the issue to ensure proper functioning of the safety system.

9. How long does it typically take to repair OBDII code B1731 in a Hyundai?

- The repair time can vary depending on the complexity of the issue and the availability of parts. It is best to consult with a professional technician to get an accurate estimate of the repair time.

10. Is there a recall or warranty coverage for OBDII code B1731 in Hyundai vehicles?

- It is recommended to check with Hyundai or a certified dealership to see if there are any recalls or warranty coverage related to the OBDII code B1731 and the front-driver anchor pretensioner system.