B172F Code - Driver Seat Cushion Right Rear Haptic Movement
Quick Answer
The safety alert seat provides a vibration in the driver’s seat bottom cushion to alert the driver of a number of concerns. Common causes include Faulty Driver Seat Cushion Right Rear Haptic Movement Motor, Driver Seat Cushion Right Rear Haptic Movement Motor harness is open or shorted, Drivers Seat Cushion Right Rear Haptic Movement Motor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B172F indicates Driver Seat Cushion Right Rear Haptic Movement.
- Common causes
- Common causes include Faulty Driver Seat Cushion Right Rear Haptic Movement Motor, Driver Seat Cushion Right Rear Haptic Movement Motor harness is open or shorted, Drivers Seat Cushion Right Rear Haptic Movement Motor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B172F Description
The Seat Memory Control Module receives serial data messages from other modules and provides voltage to control the seat haptic movement motors. The Seat Memory Control Module will pulse the left, right, or both motors with the number of pulses requested over serial data. The Seat Memory Control Module monitors the control circuits for open, short to ground, and short to voltage conditions and will set Diagnostic Trouble Code (DTC) if a circuit fault is detected.
The seat haptic movement motor is DC motor located in the driver’s seat bottom cushion. Two seat haptic movement motors are used in the seat bottom cushion, positioned on the left and right side. An offset weight is attached to the motor. When activated, the spinning offset weight creates a vibration felt by the driver through the seat cushion.
Each seat haptic movement motor receives a constant chassis ground. The motor is controlled by the Seat Memory Control Module providing voltage through a dedicated control circuit. When an alert is required, the Seat Memory Control Module will apply voltage, activating the seat haptic movement motor.
What are the Possible Causes of the DTC B172F?
- Faulty Driver Seat Cushion Right Rear Haptic Movement Motor
- Driver Seat Cushion Right Rear Haptic Movement Motor harness is open or shorted
- Drivers Seat Cushion Right Rear Haptic Movement Motor circuit poor electrical connection
- Faulty Seat Memory Control Module
How to Fix the DTC B172F?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B172F code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B172F code?
Need more information on how to fix the B172F code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B172F code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- B172F Buick — Driver Seat Cushion Right Rear Haptic Movement
- B172F Cadillac — Driver Seat Cushion Right Rear Haptic Movement
- B172F Chevrolet — Driver Seat Cushion Right Rear Haptic Movement
- B172F GMC — Driver Seat Cushion Right Rear Haptic Movement
Frequently Asked Questions about B172F Code
No Frequently Asked Questions about B172F Code found.
Discuss the causes and fixes for B172F OBDII Code
Code B172F comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
