B1707 Chrysler Code - Left Reverse Lamp Control Circuit
Quick Answer
The Body Control Module (BCM) receives a communication network message to indicate the vehicle is in reverse. Common causes include Blown Left Backup Bulb, Faulty Left Backup Lamp, Left Backup Lamp harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1707 Chrysler indicates Left Reverse Lamp Control Circuit.
- Common causes
- Common causes include Blown Left Backup Bulb, Faulty Left Backup Lamp, Left Backup Lamp harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1707 Chrysler Description
What are the Possible Causes of the DTC B1707 Chrysler?
- Blown Left Backup Bulb
- Faulty Left Backup Lamp
- Left Backup Lamp harness is open or shorted
- Left Backup Lamp circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC B1707 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B1707-15 LEFT REVERSE LAMP CONTROL CIRCUIT SHORT TO BATTERY OR OPEN
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1707 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1707 Chrysler code?
Need more information on how to fix the B1707 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1707 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1707 Chrysler Code
1. What are the common symptoms of OBDII code B1707 Chrysler related to the Left Reverse Lamp Control Circuit?
- The common symptoms include the left reverse lamp not functioning properly or not turning on when the vehicle is put in reverse.
2. What are some possible causes of OBDII code B1707 Chrysler for the Left Reverse Lamp Control Circuit?
- Possible causes include a faulty reverse lamp bulb, damaged wiring or connectors in the circuit, a defective reverse lamp switch, or a problem with the Body Control Module (BCM).
3. How can I diagnose the issue with OBDII code B1707 Chrysler for the Left Reverse Lamp Control Circuit?
- You can start by visually inspecting the left reverse lamp, checking the wiring and connectors for any damage, testing the reverse lamp switch, and using a diagnostic scanner to read the trouble codes and pinpoint the exact issue.
4. What are some basic repair tips for fixing OBDII code B1707 Chrysler related to the Left Reverse Lamp Control Circuit?
- Some basic repair tips include replacing the left reverse lamp bulb if it is faulty, repairing any damaged wiring or connectors, testing and replacing the reverse lamp switch if needed, or reprogramming the BCM if the issue lies there.
5. Can I continue driving with OBDII code B1707 Chrysler triggered for the Left Reverse Lamp Control Circuit?
- It is not recommended to continue driving with this issue as it can affect the visibility and safety of your vehicle, especially when reversing in low-light conditions.
6. How much does it typically cost to repair OBDII code B1707 Chrysler for the Left Reverse Lamp Control Circuit?
- The cost of repair can vary depending on the exact cause of the issue, but it can range from a simple bulb replacement costing a few dollars to more complex repairs involving wiring or module replacements that can cost a few hundred dollars.
7. Do I need special tools to diagnose and repair OBDII code B1707 Chrysler related to the Left Reverse Lamp Control Circuit?
- While basic tools like a diagnostic scanner, a multimeter, and common hand tools may be sufficient for diagnosis and some repairs, specialized tools may be needed for more advanced troubleshooting or programming tasks related to the BCM.
8. Are there any recalls or technical service bulletins (TSBs) related to OBDII code B1707 Chrysler for the Left Reverse Lamp Control Circuit?
- It is recommended to check with your local Chrysler dealership or online resources for any relevant recalls or TSBs related to this issue, as manufacturers may provide support for known issues like this.
9. How can I prevent OBDII code B1707 Chrysler from recurring for the Left Reverse Lamp Control Circuit?
- Regularly inspecting and maintaining the vehicle's lighting system, ensuring proper installation of bulbs, and addressing any wiring issues promptly can help prevent the recurrence of this trouble code.
10. Is it possible to reset or clear OBDII code B1707 Chrysler for the Left Reverse Lamp Control Circuit without fixing the underlying issue?
- While you can clear the trouble code with a diagnostic scanner, it is not recommended as the issue will likely reappear until the root cause is addressed. It's important to fix the problem to ensure the proper functioning of the left reverse lamp.
Discuss the causes and fixes for B1707 Chrysler OBDII Code
Code B1707 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
