B16E7 Chrysler Code - License Plate Lamp Control Circuit
Quick Answer
The Body Control Module (BCM) receives the input from the headlamp switch requesting lamp illumination. Common causes include Faulty License Plate Lamp, License Plate Lamp harness is open or shorted, License Plate Lamp circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B16E7 Chrysler indicates License Plate Lamp Control Circuit.
- Common causes
- Common causes include Faulty License Plate Lamp, License Plate Lamp harness is open or shorted, License Plate Lamp circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B16E7 Chrysler Description
What are the Possible Causes of the DTC B16E7 Chrysler?
- Faulty License Plate Lamp
- License Plate Lamp harness is open or shorted
- License Plate Lamp circuit poor electrical connection
- Faulty Rear Camera
- Faulty Body Control Module (BCM)
How to Fix the DTC B16E7 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B16E7-15 LICENSE PLATE LAMP CONTROL CIRCUIT SHORT TO BATTERY OR OPEN
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B16E7 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B16E7 Chrysler code?
Need more information on how to fix the B16E7 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B16E7 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B16E7 Chrysler Code
1. What are the common symptoms of OBDII code B16E7 in a Chrysler related to the License Plate Lamp Control Circuit?
The common symptoms include a malfunctioning license plate lamp, illumination of the check engine light, and a diagnostic trouble code indicating an issue with the lamp control circuit.
2. What are the possible causes of OBDII code B16E7 in a Chrysler?
Possible causes of this code may include a faulty license plate lamp, damaged wiring or connectors in the circuit, a blown fuse, or a defective lamp control module.
3. How can I diagnose the issue causing OBDII code B16E7 in my Chrysler?
To diagnose the issue, you can start by visually inspecting the license plate lamp and its wiring for any visible damage. Additionally, using a multimeter to check for continuity in the circuit and testing the fuse related to the lamp control circuit can help pinpoint the problem.
4. What are some repair tips for addressing OBDII code B16E7 in a Chrysler?
Repair tips may include replacing the faulty license plate lamp, repairing or replacing damaged wiring or connectors, checking and replacing any blown fuses, and resetting the diagnostic trouble code after the issue has been resolved.
5. Can I drive my Chrysler with OBDII code B16E7 related to the License Plate Lamp Control Circuit?
While it may be safe to drive with this issue, it is recommended to address the problem as soon as possible to ensure proper functioning of the license plate lamp and to prevent any potential safety hazards or legal consequences related to driving with a malfunctioning lamp.
6. How much does it typically cost to repair OBDII code B16E7 in a Chrysler?
The cost of repairing this code can vary depending on the specific cause of the issue and the labor rates of the repair shop. Replacing a license plate lamp or a fuse may be relatively inexpensive, while repairing wiring or replacing a control module could be more costly.
7. Is OBDII code B16E7 in a Chrysler a common issue?
While not extremely common, issues related to the License Plate Lamp Control Circuit can occur in Chrysler vehicles due to various factors such as age, wear and tear, or electrical problems.
8. Can I reset OBDII code B16E7 in my Chrysler without repairing the issue?
It is not recommended to simply reset the diagnostic trouble code without addressing the underlying problem causing OBDII code B16E7. Resetting the code without fixing the issue will likely result in the check engine light re-illuminating once the problem is detected again.
9. Are there any preventive measures I can take to avoid OBDII code B16E7 in my Chrysler?
Regularly inspecting the condition of your license plate lamp, checking the wiring for any signs of damage, and promptly addressing any lighting-related issues can help prevent the occurrence of OBDII code B16E7 in your Chrysler.
10. Can a DIY enthusiast repair OBDII code B16E7 in a Chrysler?
Depending on the specific cause of the issue, DIY enthusiasts with some automotive repair experience may be able to address OBDII code B16E7 by replacing a faulty lamp, checking and repairing wiring, or replacing a fuse. However, more complex issues may require professional diagnosis and repair.
Discuss the causes and fixes for B16E7 Chrysler OBDII Code
Code B16E7 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
