B16DF Chrysler Code - Right Tail Lamp 1 Control Circuit
Quick Answer
The Body Control Module (BCM) receives the input from the headlamp switch requesting park lamp illumination. Common causes include Faulty Right Rear Park Lamp, Right Rear Park Lamp harness is open or shorted, Right Rear Park Lamp circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B16DF Chrysler indicates Right Tail Lamp 1 Control Circuit.
- Common causes
- Common causes include Faulty Right Rear Park Lamp, Right Rear Park Lamp harness is open or shorted, Right Rear Park Lamp circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B16DF Chrysler Description
What are the Possible Causes of the DTC B16DF Chrysler?
- Faulty Right Rear Park Lamp
- Right Rear Park Lamp harness is open or shorted
- Right Rear Park Lamp circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC B16DF Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B16DF-15 RIGHT TAILLAMP 1 CONTROL CIRCUIT SHORT TO BATTERY OR OPEN
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B16DF Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B16DF Chrysler code?
Need more information on how to fix the B16DF Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B16DF Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B16DF Chrysler Code
1. What are the common symptoms of OBDII code B16DF Chrysler (Right Tail Lamp 1 Control Circuit)?
The common symptoms include the right tail lamp not functioning properly, dim or flickering light, or a warning light on the dashboard indicating a fault.
2. What are the possible causes of OBDII code B16DF Chrysler (Right Tail Lamp 1 Control Circuit)?
Possible causes may include a faulty tail lamp bulb, a damaged wiring harness, a malfunctioning tail lamp control module, or a blown fuse related to the right tail lamp circuit.
3. How can I diagnose the issue related to OBDII code B16DF Chrysler?
You can start by visually inspecting the right tail lamp for any visible damage. Check the bulb, wiring, and connections for any issues. Using a multimeter, you can test the continuity of the wiring and check for voltage at different points in the circuit.
4. What are some repair tips for fixing OBDII code B16DF Chrysler?
Ensure that the tail lamp bulb is securely seated and not burnt out. Check for any frayed or damaged wiring and repair or replace as needed. Resetting the fault code with an OBDII scanner after repairs can help clear the warning light.
5. Can weather conditions affect the right tail lamp circuit and trigger OBDII code B16DF Chrysler?
Yes, extreme weather conditions or water ingress can cause corrosion in the wiring or connections, leading to a malfunction in the right tail lamp circuit.
6. Is it safe to continue driving with OBDII code B16DF Chrysler triggered?
It is not recommended to drive with a malfunctioning tail lamp, as it can compromise your safety on the road and may result in a citation from law enforcement.
7. How much does it typically cost to repair OBDII code B16DF Chrysler?
The cost of repair can vary depending on the exact cause of the issue. Replacing a bulb or fuse may be relatively inexpensive, while repairing a damaged wiring harness or control module can be more costly.
8. Can I fix OBDII code B16DF Chrysler on my own, or should I seek professional help?
If you have experience working with automotive electrical systems, you may be able to diagnose and repair the issue yourself. However, if you are unsure or uncomfortable with electrical repairs, it's best to seek help from a qualified mechanic.
9. Will OBDII code B16DF Chrysler cause my vehicle to fail an emissions test?
While the right tail lamp circuit issue itself may not directly cause your vehicle to fail an emissions test, it is still important to address the problem to ensure the overall safety and functionality of your vehicle.
10. How can I prevent OBDII code B16DF Chrysler from occurring in the future?
Regularly inspecting your vehicle's lighting system, addressing any issues promptly, and ensuring proper maintenance can help prevent the recurrence of OBDII code B16DF Chrysler related to the right tail lamp circuit.
Discuss the causes and fixes for B16DF Chrysler OBDII Code
Code B16DF Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
