B16D7 Jeep Code - Left Tail Lamp 1 Control Circuit
Quick Answer
The Body Control Module (BCM) receives the input from the headlamp switch requesting park lamp illumination. Common causes include Faulty Left Rear Park Lamp, Left Rear Park Lamp harness is open or shorted, Left Rear Park Lamp circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B16D7 Jeep indicates Left Tail Lamp 1 Control Circuit.
- Common causes
- Common causes include Faulty Left Rear Park Lamp, Left Rear Park Lamp harness is open or shorted, Left Rear Park Lamp circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B16D7 Jeep Description
What are the Possible Causes of the DTC B16D7 Jeep?
- Faulty Left Rear Park Lamp
- Left Rear Park Lamp harness is open or shorted
- Left Rear Park Lamp circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC B16D7 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B16D7-15 LEFT TAILLAMP 1 CONTROL CIRCUIT SHORT TO BATTERY OR OPEN
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B16D7 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B16D7 Jeep code?
Need more information on how to fix the B16D7 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B16D7 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B16D7 Jeep Code
1. What are the common symptoms of OBDII code B16D7 in a Jeep related to the Left Tail Lamp 1 Control Circuit?
The common symptoms include a malfunctioning left tail lamp, flickering or dimming of the left tail light, or a warning light on the dashboard indicating a fault.
2. What are the possible causes of OBDII code B16D7 in a Jeep?
Possible causes include a faulty left tail lamp assembly, damaged wiring or connectors in the left tail lamp circuit, a blown fuse, or an issue with the Body Control Module (BCM).
3. How can I diagnose the OBDII code B16D7 in my Jeep related to the Left Tail Lamp 1 Control Circuit?
You can start by visually inspecting the left tail lamp for any damage. Check the wiring and connectors for any signs of wear or corrosion. Use a multimeter to test the voltage and continuity in the circuit.
4. Can I repair OBDII code B16D7 in my Jeep on my own?
If you have experience working with automotive electrical systems, you may be able to repair the issue on your own. However, if you are unsure or unfamiliar with electrical work, it's best to seek help from a professional mechanic.
5. Is it safe to drive my Jeep with OBDII code B16D7 related to the Left Tail Lamp 1 Control Circuit?
It is not recommended to drive your Jeep with a malfunctioning tail lamp, as it can reduce visibility to other drivers and increase the risk of accidents, especially in low-light conditions.
6. How much does it typically cost to repair OBDII code B16D7 in a Jeep?
The cost of repair can vary depending on the underlying cause of the issue. It may range from replacing a bulb or fuse to repairing or replacing wiring and components in the circuit. It's best to consult a mechanic for an accurate estimate.
7. Can OBDII code B16D7 in a Jeep be triggered by a loose connection in the left tail lamp circuit?
Yes, a loose or poor connection in the left tail lamp circuit can cause the OBDII code B16D7 to trigger. Ensure all connections are secure and free of corrosion.
8. How can I prevent OBDII code B16D7 from reoccurring in my Jeep?
Regularly inspect and maintain your vehicle's lighting system. Replace bulbs promptly when they burn out, and address any wiring issues or damage to prevent future occurrences of the code.
9. Are there any recalls or technical service bulletins related to OBDII code B16D7 in Jeep vehicles?
It's recommended to check with the manufacturer or a Jeep dealership for any recalls or technical service bulletins related to the Left Tail Lamp 1 Control Circuit issue to see if there are any known fixes or updates available.
10. Can a failing Body Control Module (BCM) cause OBDII code B16D7 in a Jeep?
Yes, a malfunctioning Body Control Module (BCM) can potentially cause issues with the left tail lamp control circuit, leading to the triggering of OBDII code B16D7. If all other components check out, the BCM may need to be inspected by a professional.
Discuss the causes and fixes for B16D7 Jeep OBDII Code
Code B16D7 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
