B16D7 Chrysler Code - Left Tail Lamp 1 Control Circuit
Quick Answer
The Body Control Module (BCM) receives the input from the headlamp switch requesting park lamp illumination. Common causes include Faulty Left Rear Park Lamp, Left Rear Park Lamp harness is open or shorted, Left Rear Park Lamp circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B16D7 Chrysler indicates Left Tail Lamp 1 Control Circuit.
- Common causes
- Common causes include Faulty Left Rear Park Lamp, Left Rear Park Lamp harness is open or shorted, Left Rear Park Lamp circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B16D7 Chrysler Description
What are the Possible Causes of the DTC B16D7 Chrysler?
- Faulty Left Rear Park Lamp
- Left Rear Park Lamp harness is open or shorted
- Left Rear Park Lamp circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC B16D7 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B16D7-15 LEFT TAILLAMP 1 CONTROL CIRCUIT SHORT TO BATTERY OR OPEN
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B16D7 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B16D7 Chrysler code?
Need more information on how to fix the B16D7 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B16D7 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B16D7 Chrysler Code
1. What are the common symptoms of OBDII code B16D7 in a Chrysler related to the left tail lamp 1 control circuit?
- Common symptoms include the left tail lamp not functioning, erratic behavior of the left tail lamp, or the lamp staying constantly on.
2. What are the possible causes of OBDII code B16D7 in a Chrysler related to the left tail lamp 1 control circuit?
- Possible causes include a faulty left tail lamp bulb, a damaged wiring harness, a malfunctioning lamp control module, or a poor electrical connection.
3. How can I diagnose the issue causing OBDII code B16D7 in my Chrysler’s left tail lamp 1 control circuit?
- Start by visually inspecting the left tail lamp for any visible damage. Check the bulb, wiring, and connections for signs of wear or corrosion. Use a multimeter to test the continuity of the circuit.
4. Can I repair OBDII code B16D7 in my Chrysler related to the left tail lamp 1 control circuit myself?
- If you have experience with automotive electrical systems and access to the necessary tools, you may be able to repair the issue yourself by replacing the faulty bulb, repairing damaged wiring, or addressing poor connections.
5. Is it safe to continue driving my Chrysler with OBDII code B16D7 related to the left tail lamp 1 control circuit?
- It is not recommended to drive your vehicle with a malfunctioning tail lamp, as it can compromise your safety and visibility on the road. It's best to address the issue promptly.
6. Will resetting the OBDII code B16D7 in my Chrysler related to the left tail lamp 1 control circuit make the problem go away?
- Resetting the code may temporarily turn off the warning light, but it will not fix the underlying issue causing the fault. It's important to diagnose and repair the problem to prevent it from recurring.
7. How much does it typically cost to repair OBDII code B16D7 in a Chrysler related to the left tail lamp 1 control circuit?
- The cost of repair can vary based on the specific cause of the issue. Replacing a bulb or fixing a loose connection may be relatively inexpensive, while replacing a control module or addressing extensive wiring damage can be more costly.
8. Can extreme weather conditions impact the occurrence of OBDII code B16D7 in a Chrysler related to the left tail lamp 1 control circuit?
- Yes, extreme weather conditions such as heavy rain, snow, or extreme temperatures can potentially damage the tail lamp components or wiring, leading to the occurrence of this fault code.
9. Are there any preventive measures I can take to avoid encountering OBDII code B16D7 in my Chrysler related to the left tail lamp 1 control circuit?
- Regularly inspecting your vehicle's tail lamps for any signs of damage, ensuring proper bulb function, and maintaining good electrical connections can help prevent issues that may trigger this fault code.
10. Will replacing the left tail lamp assembly resolve OBDII code B16D7 in my Chrysler related to the left tail lamp 1 control circuit?
- Replacing the entire left tail lamp assembly may fix the issue if the problem is directly related to a faulty lamp or control module within the assembly. However, it's recommended to diagnose the specific cause before proceeding with a replacement.
Discuss the causes and fixes for B16D7 Chrysler OBDII Code
Code B16D7 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
