B16B7 Jeep Code - Center Stop Lamp Control Circuit
Quick Answer
The Body Control Module (BCM) receives a hardwired brake signal from the Anti-lock Brake System (ABS) module indicating that the Brake Pedal is applied. Common causes include Faulty Center Stop Lamp, Center Stop Lamp harness is open or shorted, Center Stop Lamp circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B16B7 Jeep indicates Center Stop Lamp Control Circuit.
- Common causes
- Common causes include Faulty Center Stop Lamp, Center Stop Lamp harness is open or shorted, Center Stop Lamp circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B16B7 Jeep Description
What are the Possible Causes of the DTC B16B7 Jeep?
- Faulty Center Stop Lamp
- Center Stop Lamp harness is open or shorted
- Center Stop Lamp circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC B16B7 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B16B7-15 CENTER STOP LAMP CONTROL CIRCUIT SHORT TO BATTERY OR OPEN
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B16B7 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B16B7 Jeep code?
Need more information on how to fix the B16B7 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B16B7 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B16B7 Jeep Code
1. What are the common symptoms of OBDII code B16B7 in a Jeep related to the Center Stop Lamp Control Circuit?
- The common symptoms include the center stop lamp not illuminating when the brake pedal is pressed, the brake lights staying on constantly, or a warning light on the dashboard indicating a brake light issue.
2. What are the possible causes of OBDII code B16B7 in a Jeep?
- The code B16B7 can be triggered by issues such as a faulty brake light switch, a damaged wiring harness, a defective center stop lamp control module, or a blown fuse related to the brake lights.
3. How can I diagnose the Center Stop Lamp Control Circuit issue in my Jeep with OBDII code B16B7?
- To diagnose the problem, you can start by visually inspecting the brake light switch, checking the wiring for any visible damage, testing the brake light bulbs, and using a multimeter to check for continuity in the circuit.
4. Is it safe to drive my Jeep with OBDII code B16B7 indicating an issue with the Center Stop Lamp Control Circuit?
- It is not recommended to drive the vehicle with malfunctioning brake lights, as it can pose a safety hazard by reducing visibility to other drivers, especially when braking.
5. How can I repair OBDII code B16B7 related to the Center Stop Lamp Control Circuit in my Jeep?
- Repairing the issue may involve replacing the brake light switch, repairing or replacing damaged wiring, replacing the center stop lamp control module, or fixing any blown fuses in the brake light circuit.
6. Can I reset the OBDII code B16B7 in my Jeep without fixing the underlying issue?
- While you can clear the code using an OBDII scanner, it is important to address the root cause of the problem to prevent the code from reoccurring and ensure the proper functioning of the brake lights.
7. Are there any DIY tips for troubleshooting OBDII code B16B7 in a Jeep?
- DIY tips include checking and replacing brake light bulbs, inspecting the brake light switch for proper operation, ensuring there are no loose connections in the wiring, and checking for any blown fuses.
8. How much does it typically cost to repair OBDII code B16B7 related to the Center Stop Lamp Control Circuit in a Jeep?
- The cost of repair can vary depending on the specific issue, but it may range from $50 to $200 for parts and labor, with the most common repairs involving replacing the brake light switch or fixing wiring problems.
9. Can a mechanic easily fix OBDII code B16B7 in a Jeep, or is it a complex issue?
- A qualified mechanic should be able to diagnose and repair OBDII code B16B7 related to the Center Stop Lamp Control Circuit efficiently, as long as they have the necessary diagnostic tools and expertise in automotive electrical systems.
10. How can I prevent OBDII code B16B7 from occurring in my Jeep's Center Stop Lamp Control Circuit in the future?
- To prevent the code from reoccurring, it is important to perform regular maintenance checks on the brake lights, replace any faulty components promptly, and ensure the electrical connections are secure and free from corrosion.
Discuss the causes and fixes for B16B7 Jeep OBDII Code
Code B16B7 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
