B16AF RAM Code - Left Stop Lamp Control Circuit
Quick Answer
The Body Control Module (BCM) receives a hardwired brake signal from the Anti-lock Brake System (ABS) module indicating that the Brake Pedal is applied. Common causes include Faulty Left Stop Lamp, Left Stop Lamp harness is open or shorted, Left Stop Lamp circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B16AF RAM indicates Left Stop Lamp Control Circuit.
- Common causes
- Common causes include Faulty Left Stop Lamp, Left Stop Lamp harness is open or shorted, Left Stop Lamp circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B16AF RAM Description
What are the Possible Causes of the DTC B16AF RAM?
- Faulty Left Stop Lamp
- Left Stop Lamp harness is open or shorted
- Left Stop Lamp circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC B16AF RAM?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B16AF-15 LEFT STOP LAMP CONTROL CIRCUIT SHORT TO BATTERY OR OPEN
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B16AF RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B16AF RAM code?
Need more information on how to fix the B16AF RAM code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B16AF RAM code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B16AF RAM Code
1. What are the common symptoms of OBDII code B16AF RAM titled Left Stop Lamp Control Circuit?
The common symptoms include a non-functioning left stop lamp, brake light warning indicator on the dashboard, or failure of the brake light to illuminate when the brake pedal is pressed.
2. What could cause the OBDII code B16AF RAM to trigger?
The code B16AF RAM is typically triggered by a fault in the wiring, connectors, or components related to the left stop lamp control circuit, such as a damaged wire, faulty brake light switch, or defective control module.
3. How can I diagnose the issue related to OBDII code B16AF RAM?
You can diagnose the issue by inspecting the wiring and connectors for damage, checking the brake light switch for proper operation, and testing the voltage at various points in the left stop lamp control circuit.
4. What are some repair tips for fixing OBDII code B16AF RAM?
Repair tips include repairing or replacing damaged wiring, connectors, or components in the left stop lamp control circuit, ensuring proper grounding, and resetting the fault code after completing the repairs.
5. Can I drive my vehicle with the OBDII code B16AF RAM triggered?
It is not recommended to drive your vehicle with the code B16AF RAM triggered, as it indicates a potential issue with the left stop lamp control circuit, which could compromise your safety on the road.
6. How much does it cost to repair OBDII code B16AF RAM?
The cost of repairing OBDII code B16AF RAM can vary depending on the specific cause of the issue, but it typically involves labor charges for diagnosis and repair, as well as the cost of any replacement parts needed.
7. Can I reset the OBDII code B16AF RAM without fixing the underlying issue?
While you can clear the fault code using an OBDII scanner, it is important to address the underlying issue causing the code to prevent it from recurring and ensure the proper operation of your vehicle's brake lights.
8. Are there any recalls or technical service bulletins related to OBDII code B16AF RAM?
It is advisable to check with your vehicle manufacturer or dealership for any recalls or technical service bulletins related to OBDII code B16AF RAM, as they may provide specific guidance or solutions for this issue.
9. What should I do if the OBDII code B16AF RAM keeps coming back after repairs?
If the code B16AF RAM keeps coming back after repairs, it may indicate that the underlying issue was not fully resolved or that there is another related issue present. It is recommended to recheck the repairs and perform further diagnostics if necessary.
10. Is it possible to prevent OBDII code B16AF RAM from occurring in the future?
You can help prevent OBDII code B16AF RAM from occurring in the future by regularly inspecting and maintaining the wiring, connectors, and components in the left stop lamp control circuit, ensuring proper installation and operation of all related parts.
Discuss the causes and fixes for B16AF RAM OBDII Code
Code B16AF RAM comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
