B1697 2013 Toyota RAV4 Code - Lost Communication with Door Side Airbag Sensor Left
Quick Answer
The Side Collision Sensor Left (LH) circuit is composed of the Center Airbag Sensor Assembly, Side Airbag Sensor Left, and Rear Airbag Sensor Left. Common causes include Faulty Side Airbag Sensor Left (LH), Side Airbag Sensor Left harness is open or shorted, Side Airbag Sensor Left circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1697 2013 Toyota RAV4 indicates Lost Communication with Door Side Airbag Sensor Left.
- Common causes
- Common causes include Faulty Side Airbag Sensor Left (LH), Side Airbag Sensor Left harness is open or shorted, Side Airbag Sensor Left circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1697 2013 Toyota RAV4 Description
What are the Possible Causes of the DTC B1697 2013 Toyota RAV4?
- Faulty Side Airbag Sensor Left (LH)
- Side Airbag Sensor Left harness is open or shorted
- Side Airbag Sensor Left circuit poor electrical connection
- Faulty Center Airbag Sensor Assembly
How to Fix the DTC B1697 2013 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1697 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1697 2013 Toyota RAV4 code?
Need more information on how to fix the B1697 2013 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1697 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1697 2013 Toyota RAV4 Code
1. What are the common symptoms of OBDII code B1697 in a 2013 Toyota RAV4?
- Common symptoms include the airbag warning light illuminating on the dashboard, the door side airbag on the left not deploying during an accident, and possible issues with the vehicle's airbag system.
2. What does the OBDII code B1697 "Lost Communication with Door Side Airbag Sensor Left" mean for a 2013 Toyota RAV4?
- This code indicates a communication problem between the vehicle's onboard diagnostic system and the left door side airbag sensor, which could affect the proper functioning of the airbag system.
3. What are the possible causes of OBDII code B1697 in a 2013 Toyota RAV4?
- Possible causes include a faulty door side airbag sensor on the left side, damaged wiring or connectors related to the sensor, a blown fuse, or issues with the vehicle's airbag control module.
4. How can I diagnose the issue related to OBDII code B1697 in my 2013 Toyota RAV4?
- To diagnose the problem, you can use an OBDII scanner to read and interpret the code, inspect the wiring and connectors around the left door side airbag sensor, and perform a thorough visual inspection of the airbag system components.
5. What are the repair options for resolving OBDII code B1697 in a 2013 Toyota RAV4?
- Repair options may include replacing the faulty door side airbag sensor, repairing any damaged wiring or connectors, checking and replacing blown fuses if necessary, and resetting the airbag system using a diagnostic tool.
6. Is it safe to drive my 2013 Toyota RAV4 with OBDII code B1697 active?
- It is not recommended to drive the vehicle with an active airbag system fault code like B1697, as it could compromise the proper functioning of the airbags in case of an accident. It is advisable to address the issue promptly.
7. Can I reset the OBDII code B1697 in my 2013 Toyota RAV4 without fixing the underlying issue?
- While you can clear the code using an OBDII scanner, it is crucial to address the root cause of the problem to ensure the safety and functionality of the airbag system in your vehicle.
8. Are there any safety precautions I should take when working on the airbag system related to OBDII code B1697 in my 2013 Toyota RAV4?
- When working on the airbag system, it is important to disconnect the vehicle's battery, wait for a specified period, and follow proper safety procedures to avoid accidental airbag deployment, which can be dangerous.
9. How much does it typically cost to repair OBDII code B1697 in a 2013 Toyota RAV4?
- The cost of repairing OBDII code B1697 can vary depending on the specific issue, parts needed, labor costs, and whether you choose to address the problem yourself or take the vehicle to a professional mechanic.
10. Can a DIY enthusiast with basic automotive knowledge fix OBDII code B1697 in a 2013 Toyota RAV4?
- Depending on the specific cause of the code, a DIY enthusiast with basic automotive knowledge may be able to diagnose and repair simple issues like replacing a faulty sensor or checking wiring connections. However, more complex problems may require professional assistance.
Discuss the causes and fixes for B1697 2013 Toyota RAV4 OBDII Code
Code B1697 2013 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
