B1695 2016 Toyota RAV4 Code - Door Side Airbag Sensor Left Malfunction
Quick Answer
The Side Airbag Sensor Left (LH) consists of the Diagnostic Circuit, the Lateral Deceleration Sensor, etc. Common causes include Faulty Side Airbag Sensor Left (LH), Side Airbag Sensor Left harness is open or shorted, Side Airbag Sensor Left circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1695 2016 Toyota RAV4 indicates Door Side Airbag Sensor Left Malfunction.
- Common causes
- Common causes include Faulty Side Airbag Sensor Left (LH), Side Airbag Sensor Left harness is open or shorted, Side Airbag Sensor Left circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1695 2016 Toyota RAV4 Description
What are the Possible Causes of the DTC B1695 2016 Toyota RAV4?
- Faulty Side Airbag Sensor Left (LH)
- Side Airbag Sensor Left harness is open or shorted
- Side Airbag Sensor Left circuit poor electrical connection
- Faulty Center Airbag Sensor Assembly
How to Fix the DTC B1695 2016 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1695 2016 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1695 2016 Toyota RAV4 code?
Need more information on how to fix the B1695 2016 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1695 2016 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1695 2016 Toyota RAV4 Code
1. What does the OBDII code B1695 mean on a 2016 Toyota RAV4?
Code B1695 indicates a malfunction in the left door side airbag sensor, which plays a role in the vehicle's airbag system.
2. What are the common symptoms of code B1695 in a 2016 Toyota RAV4?
Symptoms include the airbag warning light staying illuminated, possible deactivation of the airbag system, and stored fault codes in the vehicle’s computer.
3. What causes the B1695 code in a Toyota RAV4?
Common causes include a faulty left door side airbag sensor, damaged wiring or connectors, or issues with the airbag control module.
4. Can I still drive my Toyota RAV4 with the B1695 code?
While the vehicle may still be operable, the airbag system could be compromised, posing a safety risk in the event of a collision.
5. How do I diagnose the B1695 code in a 2016 Toyota RAV4?
Diagnosis involves scanning the vehicle with an OBDII tool, inspecting the left door side airbag sensor, checking for visible wiring damage, and testing the electrical connections.
6. How can the B1695 code be fixed?
Repairs may include replacing the left door side airbag sensor, repairing or replacing damaged wiring, or resetting the airbag system with a scan tool after repairs.
7. What tools are needed to troubleshoot the B1695 code?
You’ll need an OBDII scanner, a multimeter to test electrical connections, and possibly a repair manual for wiring diagrams.
8. How much does it cost to repair the B1695 code on a Toyota RAV4?
Repair costs can range from $150 to $500, depending on whether the issue is a simple wiring fix or a full sensor replacement.
9. Can a B1695 code trigger accidentally?
Yes, it can be triggered by a loose connection, corrosion, or accidental damage to the wiring or sensor during maintenance or collision.
10. Do I need to reprogram the airbag system after fixing the B1695 code?
In most cases, you’ll need to clear the code with an OBDII scanner after repairs, but reprogramming is not typically required unless the airbag control module is replaced.
Discuss the causes and fixes for B1695 2016 Toyota RAV4 OBDII Code
Code B1695 2016 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
