B1692 2017 Toyota RAV4 Code - Lost Communication with Door Side Airbag Sensor Right
Quick Answer
The circuit for the Side Collision Sensor Right (RH) is composed of the Center Airbag Sensor, Side Airbag Sensor Right, and Rear Airbag Sensor Right. Common causes include Faulty Side Airbag Sensor Right (RH), Side Airbag Sensor Right harness is open or shorted, Side Airbag Sensor Right circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1692 2017 Toyota RAV4 indicates Lost Communication with Door Side Airbag Sensor Right.
- Common causes
- Common causes include Faulty Side Airbag Sensor Right (RH), Side Airbag Sensor Right harness is open or shorted, Side Airbag Sensor Right circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1692 2017 Toyota RAV4 Description
What are the Possible Causes of the DTC B1692 2017 Toyota RAV4?
- Faulty Side Airbag Sensor Right (RH)
- Side Airbag Sensor Right harness is open or shorted
- Side Airbag Sensor Right circuit poor electrical connection
- Faulty Center Airbag Sensor Assembly
How to Fix the DTC B1692 2017 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1692 2017 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1692 2017 Toyota RAV4 code?
Need more information on how to fix the B1692 2017 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1692 2017 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1692 2017 Toyota RAV4 Code
1. What are the common symptoms of OBDII code B1692 in a 2017 Toyota RAV4?
- Common symptoms include the airbag warning light being illuminated on the dashboard and potential issues with the right side airbag system.
2. What does the OBDII code B1692 "Lost Communication with Door Side Airbag Sensor Right" mean in a 2017 Toyota RAV4?
- This code indicates a communication problem between the vehicle's onboard diagnostic system and the right side airbag sensor located in the door.
3. What are some possible causes of OBDII code B1692 in a 2017 Toyota RAV4?
- Causes may include a faulty airbag sensor, damaged wiring or connectors, a blown fuse, or issues with the airbag control module.
4. How can I diagnose OBDII code B1692 in my 2017 Toyota RAV4?
- Diagnosis typically involves using a scan tool to retrieve the code, inspecting the airbag sensor and related components, and checking for any loose or damaged connections.
5. Can OBDII code B1692 in a 2017 Toyota RAV4 be repaired at home?
- Depending on the cause, some DIY enthusiasts may be able to address this code by checking and repairing wiring connections or replacing a faulty sensor. However, for more complex issues, professional assistance is recommended.
6. Is it safe to drive a 2017 Toyota RAV4 with OBDII code B1692 active?
- It is not recommended to drive the vehicle with an active airbag system fault code like B1692, as it could compromise the effectiveness of the airbag system in the event of a collision.
7. How much does it typically cost to repair OBDII code B1692 in a 2017 Toyota RAV4?
- Repair costs can vary depending on the underlying cause of the code, but they may range from a few hundred to a thousand dollars when factoring in parts and labor.
8. Can resetting the OBDII system clear code B1692 in a 2017 Toyota RAV4?
- Resetting the system may temporarily clear the code, but if the underlying issue is not addressed, the code is likely to reappear once the problem is detected again.
9. Are there any recalls or technical service bulletins related to OBDII code B1692 in a 2017 Toyota RAV4?
- It's advisable to check with Toyota or authorized service centers for any recalls or bulletins related to this specific code, as manufacturers sometimes issue updates for known issues.
10. How important is it to address OBDII code B1692 in a 2017 Toyota RAV4 promptly?
- It is crucial to address any airbag-related fault codes promptly to ensure the safety systems in the vehicle function correctly in the event of an accident.
Discuss the causes and fixes for B1692 2017 Toyota RAV4 OBDII Code
Code B1692 2017 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
