B1692 2016 Toyota RAV4 Code - Lost Communication with Door Side Airbag Sensor Right
Quick Answer
The circuit for the Side Collision Sensor Right (RH) is composed of the Center Airbag Sensor, Side Airbag Sensor Right, and Rear Airbag Sensor Right. Common causes include Faulty Side Airbag Sensor Right (RH), Side Airbag Sensor Right harness is open or shorted, Side Airbag Sensor Right circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1692 2016 Toyota RAV4 indicates Lost Communication with Door Side Airbag Sensor Right.
- Common causes
- Common causes include Faulty Side Airbag Sensor Right (RH), Side Airbag Sensor Right harness is open or shorted, Side Airbag Sensor Right circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1692 2016 Toyota RAV4 Description
What are the Possible Causes of the DTC B1692 2016 Toyota RAV4?
- Faulty Side Airbag Sensor Right (RH)
- Side Airbag Sensor Right harness is open or shorted
- Side Airbag Sensor Right circuit poor electrical connection
- Faulty Center Airbag Sensor Assembly
How to Fix the DTC B1692 2016 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1692 2016 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1692 2016 Toyota RAV4 code?
Need more information on how to fix the B1692 2016 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1692 2016 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1692 2016 Toyota RAV4 Code
1. What does the OBDII code B1692 mean on a 2016 Toyota RAV4?
B1692 indicates a loss of communication with the right-side door airbag sensor, which is part of the vehicle's airbag system.
2. What are the common symptoms of the B1692 code?
Symptoms may include an illuminated airbag warning light, a stored trouble code, and the potential for the airbag system to malfunction during an accident.
3. What causes the B1692 code to appear?
Common causes include a faulty door side airbag sensor, damaged wiring or connectors, corrosion, or a communication failure in the airbag control module.
4. Can the B1692 code affect airbag deployment?
Yes, this code can affect proper airbag deployment, potentially compromising passenger safety in a collision.
5. How do you diagnose the B1692 code?
Diagnosis involves scanning the vehicle with an OBDII scanner, inspecting the wiring and connectors for damage or corrosion, and testing the door side airbag sensor.
6. Is it safe to drive with the B1692 code active?
It is not recommended, as the airbag system may not function properly, increasing the risk of injury in an accident.
7. How do you fix the B1692 code on a 2016 Toyota RAV4?
Repairs may involve replacing the faulty side airbag sensor, repairing damaged wiring or connectors, or reprogramming the airbag control module if needed.
8. Can I reset the B1692 code without fixing the issue?
While you can clear the code temporarily with a scanner, it will likely return unless the underlying problem is resolved.
9. How much does it cost to fix the B1692 code?
Repair costs vary but typically range from $150 to $500 depending on whether the sensor, wiring, or airbag module requires replacement.
10. Can a weak battery cause the B1692 code?
While unlikely, a weak or failing battery can sometimes lead to communication errors, so checking battery health is a good starting point.
Discuss the causes and fixes for B1692 2016 Toyota RAV4 OBDII Code
Code B1692 2016 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
