B1690 2017 Toyota RAV4 Code - Door Side Airbag Sensor Right Malfunction
Quick Answer
The Side Airbag Sensor Right (RH) consists of the Diagnostic Circuit, the Lateral Deceleration Sensor, etc. Common causes include Faulty Side Airbag Sensor Right (RH), Side Airbag Sensor Right harness is open or shorted, Side Airbag Sensor Right circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1690 2017 Toyota RAV4 indicates Door Side Airbag Sensor Right Malfunction.
- Common causes
- Common causes include Faulty Side Airbag Sensor Right (RH), Side Airbag Sensor Right harness is open or shorted, Side Airbag Sensor Right circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1690 2017 Toyota RAV4 Description
What are the Possible Causes of the DTC B1690 2017 Toyota RAV4?
- Faulty Side Airbag Sensor Right (RH)
- Side Airbag Sensor Right harness is open or shorted
- Side Airbag Sensor Right circuit poor electrical connection
- Faulty Center Airbag Sensor Assembly
How to Fix the DTC B1690 2017 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1690 2017 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1690 2017 Toyota RAV4 code?
Need more information on how to fix the B1690 2017 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1690 2017 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1690 2017 Toyota RAV4 Code
What does the OBDII code B1690 mean on a 2017 Toyota RAV4?
1. The code B1690 indicates a malfunction in the right-side door airbag sensor, which is part of the supplemental restraint system (SRS). 2.
What are the symptoms of the B1690 code in a 2017 Toyota RAV4?
Common symptoms include the airbag warning light staying on, and the airbag system may not function properly in the event of a collision. 3.
What causes the B1690 code to appear in a 2017 Toyota RAV4?
The code can be triggered by issues like a faulty door side airbag sensor, damaged wiring, corroded connectors, or a problem with the SRS control module. 4.
Can I drive my 2017 Toyota RAV4 with the B1690 code?
While the vehicle is drivable, the airbag system may not deploy correctly in an accident, which compromises safety. It’s important to address the issue promptly. 5.
How do I diagnose the B1690 code in a 2017 Toyota RAV4?
Diagnosis involves using an OBDII scanner to confirm the code, visually inspecting the right-side airbag sensor, checking wiring and connectors, and testing the sensor itself. 6.
How can I fix the B1690 code on my Toyota RAV4?
Repairs may include replacing the faulty door side airbag sensor, repairing damaged wiring, cleaning corroded connectors, or reprogramming the SRS control module if needed. 7.
How much does it cost to fix the B1690 code on a 2017 Toyota RAV4?
Repair costs depend on the issue but can range from $100-$300 for sensor replacement or wiring repair. Dealer diagnostics may add to the cost. 8.
Can I reset the B1690 code without fixing the issue?
Clearing the code without addressing the problem will likely cause it to return. The underlying issue must be resolved for a permanent fix. 9.
What tools are needed to troubleshoot the B1690 code on a 2017 Toyota RAV4?
You’ll need an OBDII scanner, a multimeter to check wiring, and basic tools for accessing the sensor and connectors. 10.
Is the B1690 code covered under warranty for a 2017 Toyota RAV4?
If your vehicle is still under warranty or has an extended safety warranty, the repair may be covered. Check with your Toyota dealer for confirmation.
Discuss the causes and fixes for B1690 2017 Toyota RAV4 OBDII Code
Code B1690 2017 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
