B1661 Toyota Code - Roll Over Cut Off Indicator Malfunction
Quick Answer
The Curtain Shield Airbag Cutoff Switch is a mechanism that operates both the right and left sides of the Curtain Shield Airbag and the Front Seat Outer Belt when the Center Airbag Sensor detects a roll-over. Common causes include Faulty Combination Meter Assembly, Faulty Curtain Shield Airbag Cutoff Switch, Combination Meter Assembly harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1661 Toyota indicates Roll Over Cut Off Indicator Malfunction.
- Common causes
- Common causes include Faulty Combination Meter Assembly, Faulty Curtain Shield Airbag Cutoff Switch, Combination Meter Assembly harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1661 Toyota Description
What are the Possible Causes of the DTC B1661 Toyota?
- Faulty Combination Meter Assembly
- Faulty Curtain Shield Airbag Cutoff Switch
- Combination Meter Assembly harness is open or shorted
- Combination Meter Assembly circuit poor electrical connection
- Faulty Center Airbag Sensor
How to Fix the DTC B1661 Toyota?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1661 Toyota code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1661 Toyota code?
Need more information on how to fix the B1661 Toyota code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1661 Toyota code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1661 Toyota Code
1. What are the common symptoms of OBDII code B1661 Toyota (Roll Over Cut Off Indicator Malfunction)?
- The common symptoms include the Roll Over Cut Off indicator not functioning properly or illuminating when it shouldn't.
2. What are the possible causes of the Roll Over Cut Off Indicator Malfunction (B1661) in a Toyota?
- Possible causes include a faulty roll over sensor, wiring issues, or a malfunctioning indicator light.
3. How can I diagnose the Roll Over Cut Off Indicator Malfunction in my Toyota?
- To diagnose this issue, you will need a scan tool to read the OBDII code B1661. Additionally, inspect the roll over sensor and wiring for any visible damage.
4. Can I continue driving my Toyota with the B1661 code (Roll Over Cut Off Indicator Malfunction)?
- It is not recommended to drive the vehicle with this issue, as it may compromise safety features related to rollover protection.
5. How can I repair the Roll Over Cut Off Indicator Malfunction in my Toyota?
- The repair process typically involves inspecting and repairing any damaged wiring, replacing the faulty roll over sensor, or addressing any issues with the indicator light.
6. Is the B1661 code (Roll Over Cut Off Indicator Malfunction) a serious problem in a Toyota?
- Yes, this code indicates a malfunction in a critical safety feature related to rollover protection, so it should be addressed promptly.
7. Can a DIY enthusiast fix the B1661 code issue in a Toyota?
- While some basic troubleshooting steps can be performed by DIY enthusiasts, addressing the root cause of the issue may require professional diagnosis and repair.
8. How much does it cost to fix the Roll Over Cut Off Indicator Malfunction in a Toyota?
- Repair costs can vary depending on the underlying cause of the issue, but it is advisable to consult a mechanic for an accurate estimate.
9. Will resetting the OBDII code B1661 make the issue go away?
- Resetting the code may temporarily turn off the indicator light, but if the underlying problem is not fixed, the code is likely to reappear.
10. How can I prevent the Roll Over Cut Off Indicator Malfunction in my Toyota in the future?
- Regularly inspecting and maintaining the vehicle's safety systems, including the roll over sensor, can help prevent issues like the B1661 code from occurring.
Discuss the causes and fixes for B1661 Toyota OBDII Code
Code B1661 Toyota comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
