B1660 2013 Toyota RAV4 Code - Passenger Airbag ON / OFF Indicator Circuit Malfunction
Quick Answer
The Passenger Airbag ON / OFF Indicator Circuit consists of the Center Airbag Sensor Assembly and the Passenger Airbag ON / OFF Indicator. Common causes include Faulty Passenger Airbag ON / OFF Indicator Light, Passenger Airbag ON / OFF Indicator Light harness is open or shorted, Passenger Airbag ON / OFF Indicator Light circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1660 2013 Toyota RAV4 indicates Passenger Airbag ON / OFF Indicator Circuit Malfunction.
- Common causes
- Common causes include Faulty Passenger Airbag ON / OFF Indicator Light, Passenger Airbag ON / OFF Indicator Light harness is open or shorted, Passenger Airbag ON / OFF Indicator Light circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1660 2013 Toyota RAV4 Description
What are the Possible Causes of the DTC B1660 2013 Toyota RAV4?
- Faulty Passenger Airbag ON / OFF Indicator Light
- Passenger Airbag ON / OFF Indicator Light harness is open or shorted
- Passenger Airbag ON / OFF Indicator Light circuit poor electrical connection
- Faulty Center Airbag Sensor Assembly
How to Fix the DTC B1660 2013 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1660 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1660 2013 Toyota RAV4 code?
Need more information on how to fix the B1660 2013 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1660 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1660 2013 Toyota RAV4 Code
1. What does OBDII code B1660 mean for a 2013 Toyota RAV4?
- This code indicates a Passenger Airbag ON/OFF Indicator Circuit Malfunction in the vehicle's airbag system.
2. What are some common symptoms of OBDII code B1660 in a 2013 Toyota RAV4?
- Common symptoms may include the airbag light staying on or flashing on the dashboard, and the passenger airbag status indicator not functioning properly.
3. What are potential causes of the Passenger Airbag ON/OFF Indicator Circuit Malfunction in a 2013 Toyota RAV4?
- Possible causes include a faulty passenger airbag ON/OFF indicator switch, damaged wiring or connectors in the circuit, or a malfunctioning airbag control module.
4. How can I diagnose the Passenger Airbag ON/OFF Indicator Circuit Malfunction in my 2013 Toyota RAV4?
- To diagnose this issue, you can use an OBDII scanner to retrieve the specific trouble code (B1660), visually inspect the indicator switch and related wiring, and perform continuity tests to identify any faulty components.
5. Can I still drive my 2013 Toyota RAV4 with OBDII code B1660 present?
- It is not recommended to drive the vehicle with an active airbag system fault code, as the passenger airbag may not deploy correctly in the event of an accident.
6. How can I repair the Passenger Airbag ON/OFF Indicator Circuit Malfunction in my 2013 Toyota RAV4?
- Repair options may include replacing the faulty indicator switch, repairing or replacing damaged wiring, or resetting the airbag control module after addressing the underlying issue.
7. Is it possible to reset the OBDII code B1660 in a 2013 Toyota RAV4 without fixing the issue?
- While you can clear the code with an OBDII scanner, it is crucial to address the root cause of the malfunction to ensure the proper functioning of the airbag system.
8. Do I need a professional mechanic to fix OBDII code B1660 in my 2013 Toyota RAV4?
- Depending on your experience and comfort level with automotive repairs, you may be able to address this issue yourself by following diagnostic procedures and repair guidelines. However, seeking assistance from a qualified mechanic is advisable if you are unsure.
9. Are there any safety precautions to take when working on the airbag system related to OBDII code B1660 in a 2013 Toyota RAV4?
- It is crucial to disconnect the vehicle's battery and wait for a specified period before working on the airbag system to prevent accidental deployment. Additionally, following proper procedures and handling airbag components with care are essential for safety.
10. Can a faulty Passenger Airbag ON/OFF Indicator Circuit affect the overall functionality of the airbag system in a 2013 Toyota RAV4?
- While the indicator circuit malfunction may not directly impact the deployment of the airbags, it is essential to ensure the proper functioning of all components in the airbag system to maintain overall safety in the vehicle.
Discuss the causes and fixes for B1660 2013 Toyota RAV4 OBDII Code
Code B1660 2013 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
