B1647 Chrysler Code - Rear Right Turn Control Circuit Low
Quick Answer
The Total Integrated Power Module (TIPM) monitors the Rear Right Turn Control. Common causes include Faulty Rear Right Turn Signal Lamp, Rear Right Turn Signal Lamp harness is open or shorted, Rear Right Turn Signal Lamp circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1647 Chrysler indicates Rear Right Turn Control Circuit Low.
- Common causes
- Common causes include Faulty Rear Right Turn Signal Lamp, Rear Right Turn Signal Lamp harness is open or shorted, Rear Right Turn Signal Lamp circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1647 Chrysler Description
What are the Possible Causes of the DTC B1647 Chrysler?
- Faulty Rear Right Turn Signal Lamp
- Rear Right Turn Signal Lamp harness is open or shorted
- Rear Right Turn Signal Lamp circuit poor electrical connection
- Faulty Total Integrated Power Module (TIPM)
How to Fix the DTC B1647 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1647 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1647 Chrysler code?
Need more information on how to fix the B1647 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1647 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1647 Chrysler Code
1. What are the common symptoms of OBDII code B1647 Chrysler (Rear Right Turn Control Circuit Low)?
The common symptoms include the rear right turn signal not working properly, fast blinking of the turn signal, or the turn signal staying illuminated without blinking.
2. What are the possible causes of the OBDII code B1647 Chrysler?
Possible causes include a faulty rear right turn signal bulb, a damaged wiring harness, a malfunctioning turn signal switch, or a problem with the body control module.
3. How can I diagnose the issue related to OBDII code B1647 Chrysler?
You can start by inspecting the rear right turn signal bulb for any signs of damage or malfunction. Check the wiring harness for any visible issues and test the turn signal switch for proper functionality. If needed, use a diagnostic tool to check for fault codes in the body control module.
4. What are some repair tips for fixing OBDII code B1647 Chrysler?
If the issue is with the rear right turn signal bulb, simply replacing the bulb may solve the problem. For wiring harness or switch issues, repairing or replacing the damaged components may be necessary. If the problem lies with the body control module, it may require reprogramming or replacement by a professional.
5. Can I drive my vehicle with OBDII code B1647 Chrysler active?
It is generally safe to drive the vehicle with this code, but it is important to address the issue as soon as possible to ensure proper functioning of the turn signal system for safety reasons.
6. How do I reset the OBDII code B1647 Chrysler after making repairs?
After fixing the underlying issue, you can reset the code using an OBDII scanner or by disconnecting the vehicle's battery for a few minutes. However, it's recommended to verify that the repair was successful by ensuring the code does not reappear.
7. Are there any common mistakes to avoid when dealing with OBDII code B1647 Chrysler?
Avoid overlooking simple causes such as a faulty bulb or loose wiring connections. It's important to thoroughly inspect and diagnose the issue before moving on to more complex repairs.
8. Do I need special tools to diagnose and repair OBDII code B1647 Chrysler?
While basic tools like a multimeter and a set of screwdrivers may be helpful for diagnosing and repairing this code, using an OBDII scanner for code retrieval and resetting can simplify the process.
9. How long does it typically take to fix OBDII code B1647 Chrysler?
The repair time can vary depending on the underlying cause of the code. Simple fixes like replacing a bulb can be done quickly, while diagnosing and repairing wiring or module issues may take longer and require professional assistance.
10. Is it necessary to visit a mechanic for OBDII code B1647 Chrysler, or can I fix it myself?
If you are familiar with automotive electrical systems and have the necessary tools, you may be able to diagnose and repair the issue yourself. However, if you are unsure or the problem is complex, seeking assistance from a qualified mechanic is recommended.
Discuss the causes and fixes for B1647 Chrysler OBDII Code
Code B1647 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
