B163F Jeep Code - Front Right Turn Control Circuit Low
Quick Answer
The Body Control Module (BCM) receives a communication network message from the Steering Column Control Module (SCCM) requesting turn signal lamp illumination. Common causes include Blown Front Right Park and Turn Signal Bulb, Faulty Front Right Turn Lamp, Front Right Turn Lamp harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B163F Jeep indicates Front Right Turn Control Circuit Low.
- Common causes
- Common causes include Blown Front Right Park and Turn Signal Bulb, Faulty Front Right Turn Lamp, Front Right Turn Lamp harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B163F Jeep Description
What are the Possible Causes of the DTC B163F Jeep?
- Blown Front Right Park and Turn Signal Bulb
- Faulty Front Right Turn Lamp
- Front Right Turn Lamp harness is open or shorted
- Front Right Turn Lamp circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC B163F Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B163F Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B163F Jeep code?
Need more information on how to fix the B163F Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B163F Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B163F Jeep Code
1. What are the common symptoms of OBDII code B163F in a Jeep related to the Front Right Turn Control Circuit Low?
- Common symptoms include the front right turn signal not working or flashing erratically, the turn signal indicator on the dashboard flashing quickly, or a warning light on the instrument panel.
2. What are some possible causes of the Front Right Turn Control Circuit Low code in a Jeep?
- Potential causes include a faulty front right turn signal bulb, a damaged wiring harness, a defective turn signal switch, or a malfunctioning body control module.
3. How can I diagnose the Front Right Turn Control Circuit Low issue in my Jeep?
- You can start by visually inspecting the front right turn signal bulb, checking the wiring for any visible damage, testing the turn signal switch, and using an OBDII scanner to retrieve the specific fault codes.
4. Can a blown fuse cause the B163F OBDII code in a Jeep's Front Right Turn Control Circuit?
- Yes, a blown fuse in the turn signal circuit can also trigger the B163F code. It's recommended to check and replace any blown fuses as part of the diagnostic process.
5. What are some repair tips for resolving the Front Right Turn Control Circuit Low code in a Jeep?
- Repair tips include replacing the front right turn signal bulb if it's faulty, repairing any damaged wiring, testing and replacing the turn signal switch if necessary, and resetting the fault codes after repairs are completed.
6. Is it safe to continue driving my Jeep with the B163F OBDII code related to the Front Right Turn Control Circuit Low?
- It is not recommended to drive the vehicle with this code active, as it indicates a malfunction in the turn signal system, which is essential for safe signaling and visibility on the road.
7. How much can I expect to pay for professional repairs for the B163F code in a Jeep?
- The cost of repairs can vary depending on the specific cause of the issue and the labor rates in your area. It's advisable to get a diagnostic from a certified mechanic to determine the exact repair costs.
8. Does the B163F code affect other electrical systems in the Jeep?
- While the code specifically relates to the Front Right Turn Control Circuit, it's possible that issues in this circuit may impact other related electrical systems. It's important to address the root cause promptly.
9. Can I reset the B163F OBDII code in my Jeep without fixing the underlying issue?
- While you can clear the fault code with an OBDII scanner, it's not recommended to do so without addressing the root cause. The code is likely to reappear until the issue is resolved.
10. Are there any recalls or technical service bulletins related to the B163F code in Jeep vehicles?
- It's advisable to check with a Jeep dealership or the manufacturer's website for any recalls or technical service bulletins related to the B163F OBDII code to see if your vehicle is affected.
Discuss the causes and fixes for B163F Jeep OBDII Code
Code B163F Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
